Fixed garden

DetailsExtendable dome with a plastic cover that can be driven over by cars (600 kg wheel load). The cover is secured with two screws to prevent accidental opening.Technical DataDiameter: 600 mm / 800 mmHeight: 720 mm to 820 mm

DetailsThe DN 600 dome extension is compatible with the expansion and sliding domes from 03/2021Please contact us so we can assist you with advice!

The 205-liter infiltration cube is ideal for retaining, infiltrating, and draining rainwater and treated wastewater. The inlet to the infiltration cube can be configured with a DN 100 or DN 150 connection (to be determined on-site). The infiltration elements can be arranged in a row and should be wrapped in geotextile to protect against soil intrusion. The 205 L infiltration cube is an easy-to-assemble kit consisting of 6 side panels with integrated mounting pins.The "205 L Infiltration Starter Set" consists of the following components:1 205-liter infiltration cube4 m² geotextile Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. Technical Data Material: Polypropylene Weight in kg: 10 Connections: DN 100 / 150 Useful volume: 205 liters

Biological Filter for Rainwater HarvestingAre you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system  How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes.Here’s how it works: The rainwater enters the gutter through the gutter grate (or other leaf guards) and eventually flows through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary. Connection options: DN 100 (dₐ = 110) Connectable area: 170 m² Scope of delivery GreenLife BIOVITOR DN 100 Biological sedimentation filter with DN 100 connection (dₐ = 110): Rainwater inlet (inlet pipe DN 100)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active media Maintenance and cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter grates or other leaf-trapping technology, is essential and must be performed regularly. Additional Notes Please refer to the operating instructions for the installation, maintenance, and mounting of the Biovitor.