Regenwasserfilter & Vorfilter – für sauberes Wasser aus der Zisterne 

DetailsWater extraction in clean areasSinkable and suspended solids are not drawn in5 m 1" suction hose with clampsBrass check valveSuction filter

Activated Carbon Block 9 7/8" x 2 1/2"For the GreenLife pre-filter for rainwaterFor UV systemsA filter cartridge can be used for up to 4 months; after that, it must be replaced - Filter set for 1 year - or as needed- consists of 3 pieces 

DetailsFor filtering rainwater. The filter is installed in the dome of the tank. It has 4 inlets in DN100 (Ø110) / DN150 (Ø160). The vertically arranged outlet to the inlet stilling basin is also designed in DN100 (Ø110) / DN150 (Ø160). For maintenance, the filter basket is removed using the lifting rod.Technical DataMaterial: PolyethyleneWeight: 5 kgDiameter: 480 mmHeight: 575 mmConnections: DN100 (Ø110) / DN150 (Ø160)

DetailsFor filtering rainwater. The filter is installed inside the cistern or tank directly between the inlet and overflow. The height difference between these connections is at least 30 mm. The filter contains a slotted screen with a mesh size of 0.8 mm, through which purified water flows vertically into the tank. During heavy rain or when the water level is very high, dirt particles are removed from the surface of the screen. Thanks to this self-cleaning effect, maintenance is less frequent than with basket filters. Suitable for surface drainage up to 160 m². A hook for lifting the filter is included.Technical Data Material: PolyethyleneWeight: 2.35 kgLength: 500 mmWidth: 195 mmHeight: 350 mm

DetailsFor filtering rainwater. The filter features a filter basket with a mesh size of approx. 1 mm. Rainwater is fed in via a 300 mm long PE pipe DN100 (Ø110). The pipe can be shortened. The cistern filter basket is easy to retrofit and can be removed effortlessly for cleaning.Technical DataFilter basket material: PolyethyleneFilter basket height: 240 mmFilter basket diameter: 300 mm

DetailsFor filtering rainwater. The filter basket is suspended by its stainless steel chain in the tank or cistern below the inlet (which should have an 87° elbow). It removes coarse dirt particles (> 1.5 millimeters) from the incoming rainwater and must be emptied at regular intervals.Technical DataDiameter: 300 mmHeight: 240 mmMesh size: 1.3 mmFilter basket material: Polyethylene (no additives)

DetailsSediment filter/filter cartridge, polypropylene string, 20 µm Filter set for 1 year—or as needed—consisting of 3 pieces A filter cartridge can be used for up to 4 months; after that, it must be replaced 9 7/8" (inches) x 2 1/2" (inches)

Details Sediment filter/filter cartridge, polypropylene cord, 20 µm Filter set for 1 year—or as needed—consisting of 3 pieces A filter cartridge can be used for up to 4 months, after which it must be replaced 9 7/8" (inches) x 2 1/2" (inches)

Replacement part for the in-tank filter Filter media material: Polypropylene Handle material: Stainless steel Color: blue  

Compatible with GAP X120 & GUP 46 clear water pressure pumpsFor clear water pressure pumps with a 1-inch male thread1 m suction hose with 1-inch female thread connectionBrass check valveStainless steel suction filterWater intake in clean areas Sediment and suspended solids are not drawn in

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater.From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down in the water using oxygen and natural microorganisms. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary. Connection options: DN 100 (da = 110)  Connectable area: 170 m² Scope of delivery GreenLife BIOVITOR DN 100 Biological sedimentation filter with DN 100 connection (da = 110):Rainwater inlet (inlet pipe DN 100)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaNOT included in the scope of delivery are the KG branch pipe DN110 and the KG elbow DN110 45°Maintenance and cleaning Since maintenance-intensive filter designs and chemical additives are not used and there are no wear parts, maintenance intervals are generally five to ten years. Cleaning of the pre-filter systems, e.g., gutter grates or other leaf separator technology, is essential and must be performed regularly.Additional Notes  Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater HarvestingAre you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system  How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes.Here’s how it works: The rainwater enters the gutter through the gutter grate (or other leaf guards) and eventually flows through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary. Connection options: DN 100 (dₐ = 110) Connectable area: 170 m² Scope of delivery GreenLife BIOVITOR DN 100 Biological sedimentation filter with DN 100 connection (dₐ = 110): Rainwater inlet (inlet pipe DN 100)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active media Maintenance and cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter grates or other leaf-trapping technology, is essential and must be performed regularly. Additional Notes Please refer to the operating instructions for the installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years.We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.  How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 150 (dₐ= 160) Connectable area: 550 m² Scope of delivery GreenLife BIOVITOR DN 150 Biological sedimentation filter with DN 150 connection (dₐ = 160): Rainwater inlet (inlet pipe DN 150)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravel Bio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping technology, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 200 (dₐ = 200) Connectable area: 1000 m²Scope of delivery GreenLife BIOVITOR DN 200 Biological sedimentation filter with DN 200 connection (dₐ = 200):Rainwater inlet (inlet pipe DN 200)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravel Bio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor. 

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system. How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle to the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.  Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 250 (dₐ = 250) Connectable area: 1,750 m² Scope of delivery GreenLife BIOVITOR DN 250 Biological sedimentation filter with DN 250 connection (dₐ = 250):Rainwater inlet (inlet pipe DN 250)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaMaintenance and CleaningSince the system does not rely on maintenance-intensive filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes  Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor. 

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system. How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 300 (dₐ = 315)  Connectable area: 3250 m² Scope of delivery GreenLife BIOVITOR DN 300 Biological sedimentation filter with DN 300 connection (dₐ = 315):Rainwater inlet (inlet pipe DN 300)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

GreenLife's gutter guard is the perfect filter for rainwater. Whether the water is collected in cisterns or rain barrels, plant debris such as leaves and twigs can reduce water quality. It is therefore always recommended to pre-filter rainwater as thoroughly as possible, starting right at the gutter. Leaf guards filter rainwater Especially in the fall, when trees shed their leaves, it can be very frustrating when heavy rain causes leaves to enter the downspout and thus the rainwater tank. Not only does the quality of the collected water suffer from the debris, but it can also quickly clog the downspout. Cleaning often involves a lot of effort. Therefore, always use a leaf guard. Potential problems without a leaf guard Clogged downspouts Blockages in water hoses or showerheads Discoloration of the water Reduced water quality Staining of the gutter Breeding ground for pests With this simple leaf guard from GreenLife, such problems are a thing of the past. Assembly is incredibly easy, and cleaning usually requires nothing more than a hand brush. The gutter guard also provides reliable protection against birds. They can no longer nest in the gutter and must find other places to settle. Can I filter the rainwater even further? Yes, because the gutter guard is only a pre-filter. Depending on the type of your rainwater harvesting system, you can also use downspout filters, built-in filters, or tank-mounted filters. In addition to these mechanical filters, the patented Biovitoren for cisterns can also be used. These are biological filters that require very little maintenance. Installation of the gutter protection grid Installing the gutter guard is very straightforward. Each package contains segments for approximately 3.00 meters, which simply slot together. Depending on the width of the gutter, the guard can be folded. It fits any standard gutter size.https://www.youtube.com/watch?v=IVG8j1yDEMM

DetailsFor filtering rainwater. The filter is installed in the ground in front of the tank. The height difference between the inlet and outlet is 130 mm. The filter contains a slotted screen with a mesh size of 0.8 mm. During heavy rain or when the water level is very high, debris is removed from the surface of the screen. Thanks to this self-cleaning effect, maintenance requirements are lower than with basket filters. Suitable for surface drainage up to 160 m². A hook for lifting the filter is included in the scope of delivery.Technical Data Material: PolyethyleneWeight: 14.0 kgDiameter (shaft): 400 mmHeight: 1,190 mm

Can be combined with the in-tank filter—an 87° KG elbow is required for installation (not included / must be provided by the customer)Odor trap to the storm sewerCleaning of the water surface via skimmer effect

This pre-filter provides reliable protection against contaminants, so you can use rainwater or drinking water in your home with confidence. Install this filter system only between the rainwater pump and the point of use. With the 20 µm filter cartridges, you can enjoy clear rainwater/drinking water for 4 months. After that, simply replace the filter cartridge. The diameter of the inlet and outlet is 1 inch. Included: Filter system with removable filter chamber 1x filter cartridge, so you can get started right away Wall mount

DetailsSuitable for DN 100 downspoutsFor other DN sizes, the G0001802 adapter cone is recommendedIncludes 1-inch connection setEasy installationThe double-walled design ensures the connected rain barrel is filledWhen the barrel is full, the rainwater is drained through the downspout

With this set of filter cartridges, you can operate drinking water treatment systems (UV 2000 and DVGW-certified) for approximately one year. The sediment filter and activated carbon filter cartridges must be replaced every 4 months. The set consists of: 3x 20 µm sedimentation filter cartridges  3x 10 µm sedimentation filter cartridges  3x activated carbon filter cartridges

DetailsZur Filterung des Regenwassers. Der Filter wird innerhalb der Zisterne oder des Tanks direkt zwischen Zu- und Überlauf montiert. Der Höhenversatz zwischen diesen Anschlüssen beträgt mindestens 30 mm. Im Filter befindet sich ein Spaltsieb mit einer Maschenweite von 0,8 mm, durch das gereinigtes Regenwasser senkrecht in den Tank läuft. Bei Starkregen oder sehr hohem Füllstand wird die Oberfläche des Siebes von den Schmutzpartikeln befreit. Durch diesen Selbstreinigungseffekt ist der Wartungsaufwand geringer als bei Korbfiltern. Im Überlauf befindet sich ein Siphonbogen als Geruchsverschluss. Einsetzbar zur Flächenentwässerung bis 160 m². Ein Haken zum Ausheben des Filters gehört zum Lieferumfang.Technische Daten Material: Polyethylen Gewicht: 4,0 kg Länge: 950 mm Breite: 195 mm Höhe: 460 / 330 mm