Floating suction filter for submersible pressure pumps

Fabric-reinforced pressure hose for operating pressures up to 20 bar

Specifications at a glance:Max. Delivery rate/flow rate: 75 l/min (4.5 m³/h)Max. Head: 44 m / Pressure: 4.4 barConnection sizes: Suction line 1 ¼" (inches) IG (internal thread), discharge line 1 ¼" (inches) external threadPower cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 20 mHigh-quality and durable submersible pressure pump made of stainless steel, e.g., for building servicesThe high-quality, durable, and powerful GUP 46 submersible pressure pump delivers clear water in a stainless steel housing for home and garden irrigation. It can be installed in a clean water source, such as a well, reservoir, collection tank, or rainwater tank/cistern. As a multistage submersible pressure pump, it is primarily used in building services. A float switch acts as dry-run protection. Operation / Performance: The pump is installed in the water and draws water through a 1 ¼-inch connection located on the lower side of the pump. A floating suction filter is typically connected to this. Automatic operation of the pump is achieved via an automatic switch located in the discharge line (e.g., installed inside the house). The pump is characterized by its quiet operation and is virtually silent underwater. The GUP 46 has a maximum flow rate of 75 liters per minute, a maximum head of 44 meters, and builds up a pressure of up to 4.4 bar. The power consumption (P1) is 0.85 kW.  Quality: This pump delivers water using four stainless steel impellers on a stainless steel shaft within a stainless steel housing—all water-contacting components are made of stainless materials. Protection class IP 68 ensures the pump is protected against dust and continuous submersion in water. A float switch acts as dry-run protection. Conclusion: The GUP 46 stainless steel submersible pressure pump is durable and perfectly suited for permanent installation, for example in a rainwater tank used to supply your home. All components that come into contact with water are made of non-corrosive materials (stainless steel). Additional features & notes: Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), or oils such as heating oil and vegetable oils! The water temperature must not exceed 40°C. In case of overload, the pump is shut off by the built-in thermal protection switch. After cooling down, the motor restarts automatically. The pump weighs 16.7 kg. The EAN number is 4400008111436.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter if there is a risk of frost and stored in a frost-proof location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).  Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   GUP 46 submersible pressure pump with side suction port 1 ¼ inch, with float switch for dry-run protection, with connection cable and Schuko plug (cable length 15 m) Installation and operating instructionsDelivery of this product via parcel serviceLooking for a different pump...?AMIGA MH1100 4M pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces.GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank, cistern, pit, or basement.

Specifications at a glance:Max. Delivery rate/flow rate: 100 l/min (6 m³/h)Max. Delivery head: 30 m / Pressure: 3.0 barConnection sizes: 1" (inch) F (female thread)Power cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 12 mDAB Divertron X 650 electronic multistage submersible pressure pump The DAB Divertron X 650 pump is designed for pumping clean water, e.g., rainwater, for gardening and irrigation. As a multistage submersible pump with integrated electronics for automatic on/off switching, it can be installed in collection tanks, wells, tanks, or cisterns with a maximum submersion depth of 12 meters.  Examples of applications:  Extraction of rainwater from rainwater systems, tanks, and cisternsUse of clear water inside or outside a buildingIrrigation of a green area or gardenOperation of sprinklers or sprayers (on average, three sprinklers can be operated simultaneously)Draining or pumping water, for example from poolsDomestic water supply How it works / Performance: Depending on the water volume, the integrated control system switches the pump on and off fully automatically: For example, when you turn on a faucet, the pump starts automatically and switches off again after the faucet is turned off. An integrated dry-run protection ensures that the pump is not damaged—it switches itself off automatically when there is a lack of water. An automatic reset returns the pump to operating mode after a malfunction. The pump features an integrated check valve, an integrated start-up capacitor, and thermal protection against motor overheating. A pressure switch and flow sensor are also integrated. The DAB Divertron X 650 has a maximum flow rate of 100 liters per minute, a maximum head of 30 meters, and builds up a pressure of up to 3.0 bar. The power consumption (P1) is 0.63 kW.  Quality: The DAB Divertron X 650 pump body and impellers are made of technopolymer (a high-quality, durable plastic) to resist corrosion and oxidation. The motor shaft is made of stainless steel (AISI 416 + AISI 304). The pump is characterized by high operational safety, easy installation, and high reliability. It is suitable for continuous operation and is quiet since it is installed underwater. With an IP 68 protection rating, the pump is dust- and watertight. Conclusion: The DAB Divertron X 650 is a high-quality electronic, multistage submersible pressure pump with an integrated control unit. It is ideal for use with rainwater/clear water in the home and garden. Additional Features & Notes: The pumped medium must be clean, free of solid or abrasive substances, non-viscous, non-corrosive, non-crystalline, and chemically neutral. Quick access to the capacitor is possible without disassembling the pump. We recommend a small expansion tank (installed in the pressure line) as an option in case of leaks or low water consumption. The pump can be installed in a fixed or movable vertical position. The pump weighs 9.5 kilograms.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: If there is a risk of frost, drain the pump and store it in a frost-free location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? You can get expert assistance from our customer service: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.). Our service promise:In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:  Clear water pressure pump complete with connection cable and Schuko plug wiring (cable length 15 meters) with 1" (inch) side suction port for floating intake, built-in check valve90° elbow (1 inch with female thread)Stainless steel suction filter (1-inch external thread)1 hose connection fitting, 1 inch1 clamp for 31–34 mm1 10 mm anchor, 1 hookRope for suspending the pump for easy removal from the cisternQuick start guide (detailed operating instructions here), safety instructionsThis product is delivered via parcel service Looking for a different pump...?AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house). GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank/cistern, a pit, or a basement.

Specifications at a glance:Max. Delivery rate/flow rate: 100 l/min (6.0 m³/h)Max. Head: 45 m / Pressure: 4.5 barConnection sizes: 1" (inch) F (female thread)Power cord length: 15 mSuitable for: Rainwater harvesting, via side intake: floating extraction of clean water from below the water surfaceMax. immersion depth: 12 mHigh-performance submersible pressure pump for versatile applications Our automatic GreenLife GAP X120 submersible pressure pump is a modern, powerful, and reliable submersible pressure pump. It handles large flow rates with ease and is suitable for a wide range of applications, such as water supply and drainage tasks in clear water. The pump automatically regulates the water flow based on the user’s water demand. Examples of applications:  Extraction of rainwater from rainwater systems, tanks, and cisternsUse of clear water inside or outside a buildingIrrigation of a lawn or gardenOperation of sprinklers or sprayers (on average, three sprinklers can be operated simultaneously)Draining or pumping water, for example from poolsDomestic water supply Operation / Performance: The pump is fully submersible and is immersed in the water. The maximum immersion depth is 12 meters. The pump automatically controls water delivery when the line to the consumer is open (faucet open). When the consumer is closed, the pump switches to standby mode. The pump is then in start/stop mode and maintains pressure in the line. When the consumer is opened again, the pump restarts and delivers water.  The GAP X120 has a maximum flow rate of 100 liters per minute and a maximum head of 45 meters. This extremely high-pressure pump, with a maximum of 4.5 bar, enables effortless and effective irrigation. The power consumption (P1) is 1.15 kW. A built-in thermal motor protection prevents overload and ensures automatic restart after cooling down. Optionally, a pump base with side suction can be mounted for floating intake. This allows clean water to be drawn from below the water surface, not from the bottom. Quality: The use of stainless steel and high-quality plastic ensures a long service life. An integrated dry-run protection shuts off the pump in case of water shortage. A practical handle makes transporting the pump a breeze. With an IP 68 protection rating, the pump is dust- and waterproof. Conclusion: With the GAP X120 submersible pressure pump, you are purchasing a modern, automatic pump that switches on and off automatically according to water demand, features dry-run protection and thermal motor protection, and is suitable for both side and floating suction. Additional Features & Notes: Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), oils such as heating oil and vegetable oils, or food! The water temperature must not exceed 35°C. An integrated, easy-to-clean stainless steel suction filter provides optimal protection against debris.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only pump clean water—ideally pre-filtered with the Biovitor—to remain fully functional.  You also have the option of using the pump base if the pump is placed on a surface rather than suspended (see installation instructions). Maintenance and Installation Instructions: If there is a risk of frost, drain the pump and store it in a frost-free location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is here to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.). Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:  GAP X120 submersible pump complete with connection cable and Schuko plug (cable length 15 meters)Additional pump base with 1-inch external thread on the side90° elbow (1-inch with female thread)Stainless steel suction filter (1-inch male thread; replace the pump base to install the suction filter)Double nipple (1-inch, for screwing in the hose connection nozzle)2 hose connection fittings, each 1 inch & ¾ inch with union nut (incl. 2 gaskets)Clamp (31–34 mm)Rope (for suspending the pump and for easy removal from the cistern)Installation and operating instructions Delivery of this product via parcel service Looking for a different pump...?AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clean water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house). GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank/cistern, a pit, or a basement.