Garden system AKTION with 4200 l flat tank
€1,990.00
Available, delivery time: 6 - 8 Working Days
- Description Rainwater harvesting system for the garden: “AKTION” garden system with a 4,200-liter rainwater tank Easy-to-install complet… More
- Downloads Dimensional Drawing of Flat TankDownloadFlat Tank Data SheetDownloadInstructions for flat tankDownloadSpecification Text for More
- Scope of delivery 4,200-liter flat tank made of high-quality, eco-friendly polyethylene*Compensation dome, telescopic, diameter DN 600 mmPlasti More
- Delivery procedure Please note: Our flat tanks, including the relevant accessories*, are always delivered by a freight carrier via truck. Delive More
Product information " Garden system AKTION with 4200 l flat tank"
Rainwater harvesting system for the garden: “AKTION” garden system with a 4,200-liter rainwater tank
Easy-to-install complete system for garden irrigation
How does garden irrigation work with the "AKTION" garden system?
Who is the "AKTION" irrigation system suitable for?
Is the "AKTION" garden system drive-over?
Where does the water from the overflow go when the tank is full?
Do I need a rainwater filter?
Installation and Maintenance Instructions for the 4,200-Liter Flat Tank
Additional features and notes
- Alternative equipment options are available for the tank; see “Accessories” below.
- The tank is UV-resistant and opaque.
- Possible connection sizes: DN 110
- Our tank comes with 3 pre-installed DN 110 lip seals. Additional connection points are available and can be drilled and used as needed.
- The expansion dome is infinitely extendable from 380–580 mm and can be tilted up to 5° for optimal terrain adaptation.
- The tank has a 600 mm (access) opening.
Do you have questions about this tank, its installation, or setup?
The entire system must be checked regularly for leaks, cleanliness, and stability.
- Empty the tank completely
- Remove solid residues with a soft spatula
- Clean surfaces and internal components with water
- Completely remove dirt from the tank
- Check that all internal components are securely fastened
- 4,200-liter flat tank made of high-quality, eco-friendly polyethylene*
- Compensation dome, telescopic, diameter DN 600 mm
- Plastic safety cover (load-bearing up to 200 kg) with “Flower of Life” embossing**
- Inlet flow regulator, 2-piece (installed)
- Water connection box
- Overflow siphon
- 20.4-meter gutter grate with filter function
- 10-meter rainwater pressure hose
- GAPX80 submersible pressure pump with integrated automatic switch, dry-run protection, and 10-meter connection cable, plus additional accessories
- Rainwater labeling set
- 15-year warranty on the underground tank in accordance with warranty terms
- Installation instructions
Our flat tanks, including the relevant accessories*, are always delivered by a freight carrier via truck.
Delivery Process
Once you place your order, you will first receive an email with the order confirmation. One to two business days later, we will send you a digital order confirmation, in which you will find the estimated delivery week in the top right corner—unless you have ordered with prepayment: In that case, the estimated delivery date is approximately 10 business days (Mon.–Fri.) after receipt of payment.Liability for Transport Damage
Please inspect the goods for any transport damage upon receipt. The manufacturer or supplier is not liable for transport damage; liability lies with the carrier. Transport damage reported after receipt of the goods can no longer be claimed. If the packaging is damaged, the goods must be unpacked immediately in the presence of the delivery person to identify any damage, which must be reported to the carrier in writing. The goods must remain with the buyer until the transport damage has been clarified.Do You Have Any Questions? We’re Here to Help.
Our customer service team is happy to assist you with any questions regarding product selection, application, installation, or accessories.
- Customer Service Hotline: +49 385 773 37-0 (Mon–Fri 7:00 AM–4:00 PM)
- Technical Support: +49 385 773 37-72 (Mon–Fri 8:00 AM–4:00 PM)
- Email: info@greenlife.de
Zubehörartikel
DetailsExtendable dome with a plastic cover that can be driven over by cars (600 kg wheel load). The cover is secured with two screws to prevent accidental opening.Technical DataDiameter: 600 mm / 800 mmHeight: 720 mm to 820 mm
GreenLife's gutter guard is the perfect filter for rainwater. Whether the water is collected in cisterns or rain barrels, plant debris such as leaves and twigs can reduce water quality. It is therefore always recommended to pre-filter rainwater as thoroughly as possible, starting right at the gutter. Leaf guards filter rainwater Especially in the fall, when trees shed their leaves, it can be very frustrating when heavy rain causes leaves to enter the downspout and thus the rainwater tank. Not only does the quality of the collected water suffer from the debris, but it can also quickly clog the downspout. Cleaning often involves a lot of effort. Therefore, always use a leaf guard. Potential problems without a leaf guard Clogged downspouts Blockages in water hoses or showerheads Discoloration of the water Reduced water quality Staining of the gutter Breeding ground for pests With this simple leaf guard from GreenLife, such problems are a thing of the past. Assembly is incredibly easy, and cleaning usually requires nothing more than a hand brush. The gutter guard also provides reliable protection against birds. They can no longer nest in the gutter and must find other places to settle. Can I filter the rainwater even further? Yes, because the gutter guard is only a pre-filter. Depending on the type of your rainwater harvesting system, you can also use downspout filters, built-in filters, or tank-mounted filters. In addition to these mechanical filters, the patented Biovitoren for cisterns can also be used. These are biological filters that require very little maintenance. Installation of the gutter protection grid Installing the gutter guard is very straightforward. Each package contains segments for approximately 3.00 meters, which simply slot together. Depending on the width of the gutter, the guard can be folded. It fits any standard gutter size.https://www.youtube.com/watch?v=IVG8j1yDEMM
Antique Garden Water Faucet – Stylish Water Access in the Garden Rustic stone look. Practical water collection. Charming integration. The antique-style garden water spout offers a decorative and functional way to draw rainwater directly in the garden. It is freestanding and available in a stylish granite look in several colors—ideal for anyone who wants to combine design with practicality. Your benefits at a glance Antique stone look – harmoniously integrated into natural and garden areas Freestanding – quick to install and secure to set up Child-safe – Sturdy faucet includes a removable key UV- and weather-resistant PE plastic – durable, weatherproof material Compatible with rainwater harvesting – easy connection to tanks, storage units, or cisterns Made in Germany – high-quality workmanship, robust and low-maintenance Even easier for you: service & consultation included Expert advice on optimal placement, connection, and combination with pumps or tanks Reliable delivery within Germany Spare parts service – faucets, wrenches, and gaskets available for reorder even long-term Sustainability with responsibility Made from single-material, 100% recyclable polyethylene, the water dispenser is free of plasticizers and PVC. It supports rainwater harvesting and conserves natural resources—a stylish solution with a sense of responsibility. Applications Private gardens and patios – attractive and functional Community and school gardens – durable and child-safe Landscaping and horticultural projects – decorative with practical benefits Green spaces – durable water feature with design appeal Do you have questions? We’re here to help. Our customer service team is happy to assist you with any questions regarding installation, technology, and rainwater harvesting. Phone: 0385 / 773370 Email: info@greenlife.de
DetailsThis level indicator operates without electricity; it is a pneumatic measuring device with a pump for manual operation. The underground tank can be located up to 50 m away. The tank height is continuously adjustable from 1.0 m to 2.5 m. The plastic housing is impact-resistant. Scope of deliveryIndicator20 m measuring lineMounting hardware
Please select the length above. Color: WhiteNote: The hose is an accessory for our pneumatic level indicator. It works up to 50 meters away from the tank.