GreenLife cellar tank 1,000 liters

Specifications at a glance:Max. Delivery rate/flow rate: 75 l/min (4.5 m³/h)Max. Head: 44 m / Pressure: 4.4 barConnection sizes: Suction line 1 ¼" (inches) IG (internal thread), discharge line 1 ¼" (inches) external threadPower cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 20 mHigh-quality and durable submersible pressure pump made of stainless steel, e.g., for building servicesThe high-quality, durable, and powerful GUP 46 submersible pressure pump delivers clear water in a stainless steel housing for home and garden irrigation. It can be installed in a clean water source, such as a well, reservoir, collection tank, or rainwater tank/cistern. As a multistage submersible pressure pump, it is primarily used in building services. A float switch acts as dry-run protection. Operation / Performance: The pump is installed in the water and draws water through a 1 ¼-inch connection located on the lower side of the pump. A floating suction filter is typically connected to this. Automatic operation of the pump is achieved via an automatic switch located in the discharge line (e.g., installed inside the house). The pump is characterized by its quiet operation and is virtually silent underwater. The GUP 46 has a maximum flow rate of 75 liters per minute, a maximum head of 44 meters, and builds up a pressure of up to 4.4 bar. The power consumption (P1) is 0.85 kW.  Quality: This pump delivers water using four stainless steel impellers on a stainless steel shaft within a stainless steel housing—all water-contacting components are made of stainless materials. Protection class IP 68 ensures the pump is protected against dust and continuous submersion in water. A float switch acts as dry-run protection. Conclusion: The GUP 46 stainless steel submersible pressure pump is durable and perfectly suited for permanent installation, for example in a rainwater tank used to supply your home. All components that come into contact with water are made of non-corrosive materials (stainless steel). Additional features & notes: Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), or oils such as heating oil and vegetable oils! The water temperature must not exceed 40°C. In case of overload, the pump is shut off by the built-in thermal protection switch. After cooling down, the motor restarts automatically. The pump weighs 16.7 kg. The EAN number is 4400008111436.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter if there is a risk of frost and stored in a frost-proof location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).  Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   GUP 46 submersible pressure pump with side suction port 1 ¼ inch, with float switch for dry-run protection, with connection cable and Schuko plug (cable length 15 m) Installation and operating instructionsDelivery of this product via parcel serviceLooking for a different pump...?AMIGA MH1100 4M pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces.GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank, cistern, pit, or basement.

DetailsDevice for refilling the cistern with drinking water. As the water level in the rainwater cistern drops, a solenoid valve is opened via the float switch and drinking water is added. Scope of delivery Solenoid valve DN 13 with connection cable and plug 3/4" threaded connection Float switch with 20 m cable Adapter plug and weightBall valveFlexible reinforced hoseHigh-pressure pipe, 30 cm

DetailsThe GRM 2.0 Rainwater Manager supplies all consumers with water fully automatically. If there is no rainwater in the underground tank (e.g., due to a prolonged dry spell), the pump is automatically supplied with potable water via the replenishment tank without any detours. Once the underground tank refills, the system automatically switches back to rainwater supply. The pump is equipped with dry-run protection. The free outlet in accordance with DIN EN 1717 prevents rainwater from mixing with water from the water utility. Scope of deliveryRainwater Manager GRM 2.0 (automatic)Floating intake filter incl. 10m hose"Rainwater" labeling setConnection setClamp

DetailsThe GRM 3.0 Rainwater Manager—with manual switching from rainwater to potable water supply—supplies water to all consumers. If there is no rainwater in the underground tank (e.g., due to a prolonged dry spell), the pump’s supply must be switched manually. Once the underground tank refills, the system can be manually switched back to rainwater supply. The pump is equipped with dry-run protection. The free outlet in accordance with DIN EN 1717 prevents rainwater from mixing with water from the water utility. Scope of deliveryRainwater Manager GRM 3.0 (manual)Floating intake filter incl. 10m hose"Rainwater" labeling setConnection setClamp

Specifications at a glance:Max. Delivery rate/flow rate: 100 l/min (6 m³/h)Max. Delivery head: 30 m / Pressure: 3.0 barConnection sizes: 1" (inch) F (female thread)Power cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 12 mDAB Divertron X 650 electronic multistage submersible pressure pump The DAB Divertron X 650 pump is designed for pumping clean water, e.g., rainwater, for gardening and irrigation. As a multistage submersible pump with integrated electronics for automatic on/off switching, it can be installed in collection tanks, wells, tanks, or cisterns with a maximum submersion depth of 12 meters.  Examples of applications:  Extraction of rainwater from rainwater systems, tanks, and cisternsUse of clear water inside or outside a buildingIrrigation of a green area or gardenOperation of sprinklers or sprayers (on average, three sprinklers can be operated simultaneously)Draining or pumping water, for example from poolsDomestic water supply How it works / Performance: Depending on the water volume, the integrated control system switches the pump on and off fully automatically: For example, when you turn on a faucet, the pump starts automatically and switches off again after the faucet is turned off. An integrated dry-run protection ensures that the pump is not damaged—it switches itself off automatically when there is a lack of water. An automatic reset returns the pump to operating mode after a malfunction. The pump features an integrated check valve, an integrated start-up capacitor, and thermal protection against motor overheating. A pressure switch and flow sensor are also integrated. The DAB Divertron X 650 has a maximum flow rate of 100 liters per minute, a maximum head of 30 meters, and builds up a pressure of up to 3.0 bar. The power consumption (P1) is 0.63 kW.  Quality: The DAB Divertron X 650 pump body and impellers are made of technopolymer (a high-quality, durable plastic) to resist corrosion and oxidation. The motor shaft is made of stainless steel (AISI 416 + AISI 304). The pump is characterized by high operational safety, easy installation, and high reliability. It is suitable for continuous operation and is quiet since it is installed underwater. With an IP 68 protection rating, the pump is dust- and watertight. Conclusion: The DAB Divertron X 650 is a high-quality electronic, multistage submersible pressure pump with an integrated control unit. It is ideal for use with rainwater/clear water in the home and garden. Additional Features & Notes: The pumped medium must be clean, free of solid or abrasive substances, non-viscous, non-corrosive, non-crystalline, and chemically neutral. Quick access to the capacitor is possible without disassembling the pump. We recommend a small expansion tank (installed in the pressure line) as an option in case of leaks or low water consumption. The pump can be installed in a fixed or movable vertical position. The pump weighs 9.5 kilograms.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: If there is a risk of frost, drain the pump and store it in a frost-free location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? You can get expert assistance from our customer service: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.). Our service promise:In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:  Clear water pressure pump complete with connection cable and Schuko plug wiring (cable length 15 meters) with 1" (inch) side suction port for floating intake, built-in check valve90° elbow (1 inch with female thread)Stainless steel suction filter (1-inch external thread)1 hose connection fitting, 1 inch1 clamp for 31–34 mm1 10 mm anchor, 1 hookRope for suspending the pump for easy removal from the cisternQuick start guide (detailed operating instructions here), safety instructionsThis product is delivered via parcel service Looking for a different pump...?AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house). GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank/cistern, a pit, or a basement.

What's Included 1x 125 mm hole saw with centering drill bit 3x rubber lip seal DN 100 (Ø110)    

Rubber lip seal DN 100 – installed according to customer specifications The GreenLife rubber lip seal DN 110 ensures a reliable, watertight, and durable pipe connection in cisterns and underground tanks. We are happy to install the connection on your tank according to your specifications—based on a sketch on the tank’s dimensional drawing. We drill the tank according to specifications at the factory prior to delivery. Your benefits at a glance Permanently tight – reliably prevents the leakage of water or wastewater. Perfect fit for DN 110 – ideal for standardized pipe systems. High-quality material – resistant to aging, elastic, weather-resistant. Easy installation – precise fit, ready for use immediately. Versatile application – for rainwater cisterns, wastewater tanks, and other pipe penetrations. Applications Sealing of inlet and outlet pipes in tanks and cisterns Connection of pipe systems to rainwater storage tanks Wastewater and rainwater collection systems Custom pipe penetrations according to customer specifications Technical Features Connection: DN 110 Material: high-quality, elastic rubber (EPDM) Properties: UV-resistant, weather-resistant, durable Installation: factory-installed according to customer specifications

Hybridmanager kommen immer dann zum Einsatz, wenn verschiedene Betriebswässer (z.B. Regenwasser und gereinigtes Grauwasser) aus unterschiedlichen Behältern zu einem zentralen Ort geführt und gesammelt werden und von dort mittels einer Druckerhöhungsanlage in ein Betriebswasserleitungssystem von Gebäuden gepumpt werden sollen. Ebenso werden Hybridmanager eingesetzt, wenn die Ansaugstrecke für Saug- und Druckpumpen ungünstige geodätische Verhältnisse hat oder zu lang ist. Für eine hohe Betriebssicherheit sorgen die robusten Schwimmerschalter im Hybridbehälter sowie die integrierte Trinkwasser-Nachspeisung. im Lieferumfang: Hybridbehälter / -tank Trinkwasser-Nachspeisung nach DIN EN 1717 (Ansteuerung über Schwimmerschalter) Klarwasserdruckpumpe GUP 46 mit Trockenlaufschutz und schwimmender Ansaugung (als Zubringerpumpe) Anschluss 1 1/4"  - oben am Hybridbehälter als Zulauf der Zubringerpumpe Anschluss 1 1/4" - unten am Hybridbehälter für die Druckerhöhungsanlage Anschluss 1 1/4" - unten am Hybridbehälter zur Entleerung (per Kugelhahn) Siphon als Notüberlauf Je nach Bedarf können optional bis zu 2 weitere Zubringerpumpen am Hybridbehälter angeschlossen werden, ebenso kann ein Schwimmerschalter als Signalgeber in den Hybridbehälter gesetzt werden, der z.B. ein Signal an die Gebäudeleittechnik gibt oder eine Warnmeldung auslösen kann.