GreenLife cellar tank 4,000 liters

Specifications at a glance:Max. Delivery rate/flow rate: 75 l/min (4.5 m³/h)Max. Head: 44 m / Pressure: 4.4 barConnection sizes: Suction line 1 ¼" (inches) IG (internal thread), discharge line 1 ¼" (inches) external threadPower cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 20 mHigh-quality and durable submersible pressure pump made of stainless steel, e.g., for building servicesThe high-quality, durable, and powerful GUP 46 submersible pressure pump delivers clear water in a stainless steel housing for home and garden irrigation. It can be installed in a clean water source, such as a well, reservoir, collection tank, or rainwater tank/cistern. As a multistage submersible pressure pump, it is primarily used in building services. A float switch acts as dry-run protection. Operation / Performance: The pump is installed in the water and draws water through a 1 ¼-inch connection located on the lower side of the pump. A floating suction filter is typically connected to this. Automatic operation of the pump is achieved via an automatic switch located in the discharge line (e.g., installed inside the house). The pump is characterized by its quiet operation and is virtually silent underwater. The GUP 46 has a maximum flow rate of 75 liters per minute, a maximum head of 44 meters, and builds up a pressure of up to 4.4 bar. The power consumption (P1) is 0.85 kW.  Quality: This pump delivers water using four stainless steel impellers on a stainless steel shaft within a stainless steel housing—all water-contacting components are made of stainless materials. Protection class IP 68 ensures the pump is protected against dust and continuous submersion in water. A float switch acts as dry-run protection. Conclusion: The GUP 46 stainless steel submersible pressure pump is durable and perfectly suited for permanent installation, for example in a rainwater tank used to supply your home. All components that come into contact with water are made of non-corrosive materials (stainless steel). Additional features & notes: Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), or oils such as heating oil and vegetable oils! The water temperature must not exceed 40°C. In case of overload, the pump is shut off by the built-in thermal protection switch. After cooling down, the motor restarts automatically. The pump weighs 16.7 kg. The EAN number is 4400008111436.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter if there is a risk of frost and stored in a frost-proof location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).  Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   GUP 46 submersible pressure pump with side suction port 1 ¼ inch, with float switch for dry-run protection, with connection cable and Schuko plug (cable length 15 m) Installation and operating instructionsDelivery of this product via parcel serviceLooking for a different pump...?AMIGA MH1100 4M pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces.GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank, cistern, pit, or basement.

Rubber lip seal DN 100 – installed according to customer specifications The GreenLife rubber lip seal DN 110 ensures a reliable, watertight, and durable pipe connection in cisterns and underground tanks. We are happy to install the connection on your tank according to your specifications—based on a sketch on the tank’s dimensional drawing. We drill the tank according to specifications at the factory prior to delivery. Your benefits at a glance Permanently tight – reliably prevents the leakage of water or wastewater. Perfect fit for DN 110 – ideal for standardized pipe systems. High-quality material – resistant to aging, elastic, weather-resistant. Easy installation – precise fit, ready for use immediately. Versatile application – for rainwater cisterns, wastewater tanks, and other pipe penetrations. Applications Sealing of inlet and outlet pipes in tanks and cisterns Connection of pipe systems to rainwater storage tanks Wastewater and rainwater collection systems Custom pipe penetrations according to customer specifications Technical Features Connection: DN 110 Material: high-quality, elastic rubber (EPDM) Properties: UV-resistant, weather-resistant, durable Installation: factory-installed according to customer specifications

Compact small-scale system for self-supply with DVGW certificationTreat rainwater into drinking water without chemicals Do you want to be less dependent on tap water, or do you simply not have a water connection? But do you have the option to collect rainwater? Then our rainwater treatment system with a UV disinfection unit and DVGW type-approval certificate is the right solution for you: This system can reliably meet the requirements of local health authorities regarding a DVGW-certified system.  Please also check with your local authority (e.g., the public health department in Germany) to see if any additional local regulations apply to the operation of such a system.  Whether it’s a single-family home, industrial or commercial facility, construction trailer, boathouse, or other remote building: With the GreenLife drinking water treatment system, you can supply yourself with good drinking water—derived from an inexhaustible, natural resource: rainwater! Rainwater is formed through evaporation in the atmosphere—an excellent and free initial treatment. As a result, rainwater has a high basic quality as drinking and utility water. Among other things, it is free of lime and phosphate as well as hormone and medication residues. Treating the water is advisable, as it can reabsorb substances before being stored in the tank.  How the drinking water treatment system works With our system, rainwater is treated into drinking water without chemicals: After mechanical filtration, bacteria, germs, and viruses are inactivated through UV disinfection, rendering them harmless. Via the GUP 46 submersible pressure pump, the rainwater you have collected in a water tank (cistern) is fed to the DVGW-certified drinking water UV treatment system. There, it first passes through two sediment filters (20 µm and 10 µm), then an activated carbon filter, and finally undergoes UV disinfection. The system can treat a maximum of 3.4 m³/h of water. It has been tested for safety and functionality by the German Technical and Scientific Association for Gas and Water (DVGW). For further information, please contact us at info@greenlife.de Maintenance and Care Instructions for the DVGW-Certified Treatment SystemThe special UV lamps should be replaced after 10,000 operating hours; otherwise, the disinfection rate will decrease. The filter cartridges for sediment filtration and the activated carbon filter should be replaced as needed, but at least every 4 months. You can order the replacement filter set for up to one year of water treatment from our shop. In addition, for your own safety, quality samples of the filtered water should be taken and tested at regular intervals. Advantages of the GreenLife Water Treatment System DVGW CERTRainwater treatment without chemicalsNo impairment of taste or odorExcellent water quality when using rainwaterLow-maintenance UV lampThe UV lamps used are characterized by a long service life, high disinfection performance, and low energy consumption Drinking water quality in remote locations without a drinking water connection DVGW-certified drinking water quality Long service life of the system, low operating costs Technical Notes for the DVGW ZERT Drinking Water Treatment SystemAll components are pre-assembled on a mounting plate3-stage filter: Cartridges pre-equipped with filter elementsAutomatic switch with check valve for demand-based pump controlDo not install outdoors if there is a risk of frostThe UV lamp for UV disinfection has a service life of approximately 10,000 hoursThe system requires 230 V / 50 Hz

DetailsDevice for refilling the cistern with drinking water. As the water level in the rainwater cistern drops, a solenoid valve is opened via the float switch and drinking water is added. Scope of delivery Solenoid valve DN 13 with connection cable and plug 3/4" threaded connection Float switch with 20 m cable Adapter plug and weightBall valveFlexible reinforced hoseHigh-pressure pipe, 30 cm

DetailsThe GRM 2.0 Rainwater Manager supplies all consumers with water fully automatically. If there is no rainwater in the underground tank (e.g., due to a prolonged dry spell), the pump is automatically supplied with potable water via the replenishment tank without any detours. Once the underground tank refills, the system automatically switches back to rainwater supply. The pump is equipped with dry-run protection. The free outlet in accordance with DIN EN 1717 prevents rainwater from mixing with water from the water utility. Scope of deliveryRainwater Manager GRM 2.0 (automatic)Floating intake filter incl. 10m hose"Rainwater" labeling setConnection setClamp

DetailsThe GRM 3.0 Rainwater Manager—with manual switching from rainwater to potable water supply—supplies water to all consumers. If there is no rainwater in the underground tank (e.g., due to a prolonged dry spell), the pump’s supply must be switched manually. Once the underground tank refills, the system can be manually switched back to rainwater supply. The pump is equipped with dry-run protection. The free outlet in accordance with DIN EN 1717 prevents rainwater from mixing with water from the water utility. Scope of deliveryRainwater Manager GRM 3.0 (manual)Floating intake filter incl. 10m hose"Rainwater" labeling setConnection setClamp

DetailsThe GRM 2.0 rainwater management system with MH 60 brass pump supplies all consumers with water fully automatically. If there is no rainwater in the cistern (e.g., due to a prolonged dry spell), the pump is supplied with drinking water directly via the gray makeup tank. Once the cistern refills, the system automatically switches back to rainwater supply. The pump is equipped with dry-run protection. The free outlet in accordance with DIN EN 1717 prevents rainwater from mixing with water from the water utility.

Details Fully automatic rainwater control unit. The "U 1.1" home and garden expansion package for your existing rainwater storage tank works with a clear water pressure pump. Advantages of the system No pump noise inside the house. The automatic control unit manages the water supply to all consumers automatically and reliably. If there is no rainwater in the tank during prolonged dry spells, it is immediately filled with potable water. There is always enough water available. When the tank fills with rainwater, the solenoid valve closes again. Technical Data Weight: 35.5 kg Flow rate: 4.5 m³/h Max. working pressure: 4.6 bar Rated power: 750 W Voltage: 230 V Frequency: 50 Hz Connections: 1

DetailsThis level indicator operates without electricity; it is a pneumatic measuring device with a pump for manual operation. The underground tank can be located up to 50 m away. The tank height is continuously adjustable from 1.0 m to 2.5 m. The plastic housing is impact-resistant. Scope of deliveryIndicator20 m measuring lineMounting hardware

DetailsThe electronic level indicator "Liquid check" can display both the fill level and the volume in the tank. It is easy to operate. Once the measuring hose has been installed and calibrated in accordance with regulations and the size and shape of the tank has been entered, the fill level and volume are displayed on the display unit supplied or via a WLAN connection. The measured values are shown on the digital display on the device or via WLAN connection on a PC or smartphone. As the device has a local website, the values can also be integrated into SmartHome systems that support the reading of values from websites. A program module is available for the open-source SmartHome system "FHEM".Scope of delivery"Liquid Check" level indicator module20 m measuring hose and brass weight5 V / 1A plug-in power supply with micro-USB plugFixing set