Sickerschächte – zuverlässige Lösung zur Versickerung von Regenwasser

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 10 m² of geotextile for the installation of this infiltration chamber The 140-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are critical for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adjusted based on the soil’s actual infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 16 Useful volume: 140 l Diameter in mm: 400 Height in mm: 1,120  

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 20 m² of geotextile for the installation of this infiltration tank The 500-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 31.5 Useful volume: 500 l Diameter in mm: 640 Height in mm: 1,650  

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 25 m² of geotextile for the installation of this infiltration chamber The 900-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are critical for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s actual infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 60.5 Useful volume: 900 l Diameter in mm: 780 / 1,000 Height in mm: 2,150  

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 28 m² of geotextile for the installation of this infiltration tank The 950-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are critical for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s actual infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 58 Useful volume: 950 l Diameter in mm: 762 / 800 Height in mm: 2,150  

includes a leveling dome Includes walk-on plastic cover Includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 30 m² of geotextile for the installation of this shaft The 1,000-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are critical for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 68 Useful volume: 1,000 l Diameter in mm: 1,220 / 1,240 Height in mm: 1,520 - 1,720  

includes a leveling dome Includes walk-on plastic cover Includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 45 m² of geotextile for the installation of this shaft The 2,000-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 125 Useful volume: 2,000 l Diameter in mm: 1,220 / 1,240 Height in mm: 2,480 - 2,680