Reliable pre-filter for rainwater infiltration – for effective rainwater filtration Reliably protect your infiltration system from dirt and coarse particles – with our high-quality rainwater pre-filter. The pre-assembled filter chamber, made of durable, eco-friendly plastic, is the ideal solution for efficient and long-lasting rainwater infiltration. Your benefits at a glance:Ready to connect & ready for immediate use (inlet & outlet DN 110)Effective coarse debris filtration for clean waterEasy maintenance and quick cleaningDurable, walkable plastic cover includedEnvironmentally friendly & fully recyclableUV-resistant and opaque Product description The rainwater pre-filter impresses with its ease of use, long service life, and quick installation. Incoming rainwater is filtered through a coarse debris filter basket. Filterable solid particles such as leaves and sand remain in the basket, while the purified water then flows into the infiltration system. The filter unit is easily accessible and can be easily inspected and cleaned—ideal even in areas with heavy leaf fall. Technical DetailsTwo pre-assembled DN 110 connections with rubber lip sealsInlet and outlet for standard KG pipeInspection opening Ø 400 mmCuttable shaft with marking groovesMaterial: Polyethylene (PE), free of harmful substances, chemically inertWalkable cover, child-proof screw-on Application This pre-filter is ideal for use in infiltration systems, e.g., in combination with infiltration trenches, infiltration cubes, or infiltration blocks. It can also be placed upstream of a cistern to treat incoming rainwater. Material, Manufacturing & QualityOur rainwater pre-filter is made of polyethylene (PE)—a material ideally suited for rainwater products because it is environmentally friendly, free of harmful substances, and chemically inert, meaning it does not react with other substances. Thus, the quality of the rainwater is not negatively affected. Maintenance & Installation Instructions As with the installation of KG pipes, the rainwater filter must also be embedded in gravel and compacted evenly all around. Please ensure—using a spirit level, for example—that the filter is installed horizontally. The shaft can be cut to any length and easily adapted to local conditions. It features circumferential marking grooves that serve as a guide when cutting with a standard jigsaw. Depending on the amount of fallen leaves, the filter insert should be removed several times a year for cleaning and, if necessary, rinsed with a garden hose. Do you have questions about this product, its installation, or setup? Our expert customer service team is available to provide you with professional support. Please contact us at service@greenlife.de or by phone at 0385 77 337 72 (weekdays from 8 a.m. to 4 p.m.).
Durable rainwater pre-filter with coarse debris basket – pre-assembled, low-maintenance, long-lasting The “Easy Pro” rainwater pre-filter is the reliable solution for pre-filtering rainwater before it enters your cistern or infiltration system. With two pre-assembled DN100 connections and a high-quality, walkable cover, this pre-filter offers an optimal combination of functionality, safety, and design. Thanks to the coarse debris filter basket installed in the shaft, coarse contaminants are efficiently retained. The filtered rainwater then flows cleanly for further use or infiltration into the ground. The filter is easily accessible, particularly easy to maintain, and ideally suited for installation in the ground. Product benefits at a glance:Ready to connect, pre-assembled & ready for immediate useCoarse debris filter basket for clean rainwaterDurable, slip-resistant plastic cover (load capacity up to 200 kg), child-proof screw-onuniversally applicable for cisterns or infiltration systemsTwo DN100 connections (lip seals pre-installed)Environmentally friendly: made from partially recycled PE, fully recyclableEasy to clean – ideal for areas with heavy leaf fall Application This pre-filter is ideally suited for use in infiltration systems, for example in combination with infiltration trenches, infiltration cubes, or infiltration blocks. It can also be installed upstream of a cistern to effectively remove coarse contaminants from incoming rainwater. Technical Data & NotesMaterial: durable, UV-resistant plastic (PE)Cover: walkable, slip-resistant, Ø 600 mmCleaning opening: easily accessiblePossible connection size: DN 110Symbolism: Cover design featuring the “Flower of Life” – slip-resistant & decorative Material & Quality The “Easy Pro” pre-filter is made of durable, eco-friendly polyethylene (PE)—an ideal material for use in rainwater management. PE is not only durable and shatter-resistant, but also fully recyclable, free of harmful substances, and chemically inert. This ensures that the quality of the filtered rainwater remains unaltered. Thanks to its high-quality construction, the filter is particularly easy to install and maintain. It is manufactured in a resource-efficient manner, partly using recycled plastic. Compared to pre-filters made of other materials, PE offers better recyclability, lower weight, and easier handling—both during installation and ongoing operation. Installation and Maintenance Instructions The filter should be embedded in a sand bed in a horizontal position and compacted. (An inclined position can impair function.) The shaft can be shortened and adapted to local conditions. For cleaning, we recommend regularly rinsing the filter basket with a garden hose depending on the amount of fallen leaves. Do you have any questions? Our technical support team is happy to assist you with installation, connection, or planning questions. Contact us by phone at 0385 77 337 72 (weekdays 8 a.m.–4 p.m.) or by email at service@greenlife.de.
Activated Carbon Block 9 7/8" x 2 1/2"For the GreenLife pre-filter for rainwaterFor UV systemsA filter cartridge can be used for up to 4 months; after that, it must be replaced - Filter set for 1 year - or as needed- consists of 3 pieces
DetailsFor filtering rainwater. The filter is installed in the dome of the tank. It has 4 inlets in DN100 (Ø110) / DN150 (Ø160). The vertically arranged outlet to the inlet stilling basin is also designed in DN100 (Ø110) / DN150 (Ø160). For maintenance, the filter basket is removed using the lifting rod.Technical DataMaterial: PolyethyleneWeight: 5 kgDiameter: 480 mmHeight: 575 mmConnections: DN100 (Ø110) / DN150 (Ø160)
DetailsFor filtering rainwater. The filter is installed inside the cistern or tank directly between the inlet and overflow. The height difference between these connections is at least 30 mm. The filter contains a slotted screen with a mesh size of 0.8 mm, through which purified water flows vertically into the tank. During heavy rain or when the water level is very high, dirt particles are removed from the surface of the screen. Thanks to this self-cleaning effect, maintenance is less frequent than with basket filters. Suitable for surface drainage up to 160 m². A hook for lifting the filter is included.Technical Data Material: PolyethyleneWeight: 2.35 kgLength: 500 mmWidth: 195 mmHeight: 350 mm
DetailsFor filtering rainwater. The filter features a filter basket with a mesh size of approx. 1 mm. Rainwater is fed in via a 300 mm long PE pipe DN100 (Ø110). The pipe can be shortened. The cistern filter basket is easy to retrofit and can be removed effortlessly for cleaning.Technical DataFilter basket material: PolyethyleneFilter basket height: 240 mmFilter basket diameter: 300 mm
DetailsFor filtering rainwater. The filter basket is suspended by its stainless steel chain in the tank or cistern below the inlet (which should have an 87° elbow). It removes coarse dirt particles (> 1.5 millimeters) from the incoming rainwater and must be emptied at regular intervals.Technical DataDiameter: 300 mmHeight: 240 mmMesh size: 1.3 mmFilter basket material: Polyethylene (no additives)
DetailsSediment filter/filter cartridge, polypropylene string, 20 µm Filter set for 1 year—or as needed—consisting of 3 pieces A filter cartridge can be used for up to 4 months; after that, it must be replaced 9 7/8" (inches) x 2 1/2" (inches)
Details Sediment filter/filter cartridge, polypropylene cord, 20 µm Filter set for 1 year—or as needed—consisting of 3 pieces A filter cartridge can be used for up to 4 months, after which it must be replaced 9 7/8" (inches) x 2 1/2" (inches)
Replacement part for the in-tank filter Filter media material: Polypropylene Handle material: Stainless steel Color: blue
GreenLife's gutter guard is the perfect filter for rainwater. Whether the water is collected in cisterns or rain barrels, plant debris such as leaves and twigs can reduce water quality. It is therefore always recommended to pre-filter rainwater as thoroughly as possible, starting right at the gutter. Leaf guards filter rainwater Especially in the fall, when trees shed their leaves, it can be very frustrating when heavy rain causes leaves to enter the downspout and thus the rainwater tank. Not only does the quality of the collected water suffer from the debris, but it can also quickly clog the downspout. Cleaning often involves a lot of effort. Therefore, always use a leaf guard. Potential problems without a leaf guard Clogged downspouts Blockages in water hoses or showerheads Discoloration of the water Reduced water quality Staining of the gutter Breeding ground for pests With this simple leaf guard from GreenLife, such problems are a thing of the past. Assembly is incredibly easy, and cleaning usually requires nothing more than a hand brush. The gutter guard also provides reliable protection against birds. They can no longer nest in the gutter and must find other places to settle. Can I filter the rainwater even further? Yes, because the gutter guard is only a pre-filter. Depending on the type of your rainwater harvesting system, you can also use downspout filters, built-in filters, or tank-mounted filters. In addition to these mechanical filters, the patented Biovitoren for cisterns can also be used. These are biological filters that require very little maintenance. Installation of the gutter protection grid Installing the gutter guard is very straightforward. Each package contains segments for approximately 3.00 meters, which simply slot together. Depending on the width of the gutter, the guard can be folded. It fits any standard gutter size.https://www.youtube.com/watch?v=IVG8j1yDEMM
DetailsFor filtering rainwater. The filter is installed in the ground in front of the tank. The height difference between the inlet and outlet is 130 mm. The filter contains a slotted screen with a mesh size of 0.8 mm. During heavy rain or when the water level is very high, debris is removed from the surface of the screen. Thanks to this self-cleaning effect, maintenance requirements are lower than with basket filters. Suitable for surface drainage up to 160 m². A hook for lifting the filter is included in the scope of delivery.Technical Data Material: PolyethyleneWeight: 14.0 kgDiameter (shaft): 400 mmHeight: 1,190 mm
Plastic wrench/filter clamp, 10" (inches) for the rainwater pre-filter
Can be combined with the in-tank filter—an 87° KG elbow is required for installation (not included / must be provided by the customer)Odor trap to the storm sewerCleaning of the water surface via skimmer effect
This pre-filter provides reliable protection against contaminants, so you can use rainwater or drinking water in your home with confidence. Install this filter system only between the rainwater pump and the point of use. With the 20 µm filter cartridges, you can enjoy clear rainwater/drinking water for 4 months. After that, simply replace the filter cartridge. The diameter of the inlet and outlet is 1 inch. Included: Filter system with removable filter chamber 1x filter cartridge, so you can get started right away Wall mount
DetailsSuitable for DN 100 downspoutsFor other DN sizes, the G0001802 adapter cone is recommendedIncludes 1-inch connection setEasy installationThe double-walled design ensures the connected rain barrel is filledWhen the barrel is full, the rainwater is drained through the downspout
With this set of filter cartridges, you can operate drinking water treatment systems (UV 2000 and DVGW-certified) for approximately one year. The sediment filter and activated carbon filter cartridges must be replaced every 4 months. The set consists of: 3x 20 µm sedimentation filter cartridges 3x 10 µm sedimentation filter cartridges 3x activated carbon filter cartridges
DetailsZur Filterung des Regenwassers. Der Filter wird innerhalb der Zisterne oder des Tanks direkt zwischen Zu- und Überlauf montiert. Der Höhenversatz zwischen diesen Anschlüssen beträgt mindestens 30 mm. Im Filter befindet sich ein Spaltsieb mit einer Maschenweite von 0,8 mm, durch das gereinigtes Regenwasser senkrecht in den Tank läuft. Bei Starkregen oder sehr hohem Füllstand wird die Oberfläche des Siebes von den Schmutzpartikeln befreit. Durch diesen Selbstreinigungseffekt ist der Wartungsaufwand geringer als bei Korbfiltern. Im Überlauf befindet sich ein Siphonbogen als Geruchsverschluss. Einsetzbar zur Flächenentwässerung bis 160 m². Ein Haken zum Ausheben des Filters gehört zum Lieferumfang.Technische Daten Material: Polyethylen Gewicht: 4,0 kg Länge: 950 mm Breite: 195 mm Höhe: 460 / 330 mm