Rainwater treatment system with 9,400 l tank and UV drinking water treatment

GreenLife's gutter guard is the perfect filter for rainwater. Whether the water is collected in cisterns or rain barrels, plant debris such as leaves and twigs can reduce water quality. It is therefore always recommended to pre-filter rainwater as thoroughly as possible, starting right at the gutter. Leaf guards filter rainwater Especially in the fall, when trees shed their leaves, it can be very frustrating when heavy rain causes leaves to enter the downspout and thus the rainwater tank. Not only does the quality of the collected water suffer from the debris, but it can also quickly clog the downspout. Cleaning often involves a lot of effort. Therefore, always use a leaf guard. Potential problems without a leaf guard Clogged downspouts Blockages in water hoses or showerheads Discoloration of the water Reduced water quality Staining of the gutter Breeding ground for pests With this simple leaf guard from GreenLife, such problems are a thing of the past. Assembly is incredibly easy, and cleaning usually requires nothing more than a hand brush. The gutter guard also provides reliable protection against birds. They can no longer nest in the gutter and must find other places to settle. Can I filter the rainwater even further? Yes, because the gutter guard is only a pre-filter. Depending on the type of your rainwater harvesting system, you can also use downspout filters, built-in filters, or tank-mounted filters. In addition to these mechanical filters, the patented Biovitoren for cisterns can also be used. These are biological filters that require very little maintenance. Installation of the gutter protection grid Installing the gutter guard is very straightforward. Each package contains segments for approximately 3.00 meters, which simply slot together. Depending on the width of the gutter, the guard can be folded. It fits any standard gutter size.https://www.youtube.com/watch?v=IVG8j1yDEMM

The 205-liter infiltration cube is ideal for retaining, infiltrating, and draining rainwater and treated wastewater. The inlet to the infiltration cube can be configured with a DN 100 or DN 150 connection (to be determined on-site). The infiltration elements can be arranged in a row and should be wrapped in geotextile to protect against soil intrusion. The 205 L infiltration cube is an easy-to-assemble kit consisting of 6 side panels with integrated mounting pins.The "205 L Infiltration Starter Set" consists of the following components:1 205-liter infiltration cube4 m² geotextile Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. Technical Data Material: Polypropylene Weight in kg: 10 Connections: DN 100 / 150 Useful volume: 205 liters

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 28 m² of geotextile for the installation of this infiltration tank The 950-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are critical for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s actual infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 58 Useful volume: 950 l Diameter in mm: 762 / 800 Height in mm: 2,150  

Reliable pre-filter for rainwater infiltration – for effective rainwater filtration Reliably protect your infiltration system from dirt and coarse particles – with our high-quality rainwater pre-filter. The pre-assembled filter chamber, made of durable, eco-friendly plastic, is the ideal solution for efficient and long-lasting rainwater infiltration. Your benefits at a glance:Ready to connect & ready for immediate use (inlet & outlet DN 110)Effective coarse debris filtration for clean waterEasy maintenance and quick cleaningDurable, walkable plastic cover includedEnvironmentally friendly & fully recyclableUV-resistant and opaque Product description The rainwater pre-filter impresses with its ease of use, long service life, and quick installation. Incoming rainwater is filtered through a coarse debris filter basket. Filterable solid particles such as leaves and sand remain in the basket, while the purified water then flows into the infiltration system. The filter unit is easily accessible and can be easily inspected and cleaned—ideal even in areas with heavy leaf fall. Technical DetailsTwo pre-assembled DN 110 connections with rubber lip sealsInlet and outlet for standard KG pipeInspection opening Ø 400 mmCuttable shaft with marking groovesMaterial: Polyethylene (PE), free of harmful substances, chemically inertWalkable cover, child-proof screw-on Application This pre-filter is ideal for use in infiltration systems, e.g., in combination with infiltration trenches, infiltration cubes, or infiltration blocks. It can also be placed upstream of a cistern to treat incoming rainwater. Material, Manufacturing & QualityOur rainwater pre-filter is made of polyethylene (PE)—a material ideally suited for rainwater products because it is environmentally friendly, free of harmful substances, and chemically inert, meaning it does not react with other substances. Thus, the quality of the rainwater is not negatively affected. Maintenance & Installation Instructions As with the installation of KG pipes, the rainwater filter must also be embedded in gravel and compacted evenly all around. Please ensure—using a spirit level, for example—that the filter is installed horizontally. The shaft can be cut to any length and easily adapted to local conditions. It features circumferential marking grooves that serve as a guide when cutting with a standard jigsaw. Depending on the amount of fallen leaves, the filter insert should be removed several times a year for cleaning and, if necessary, rinsed with a garden hose. Do you have questions about this product, its installation, or setup? Our expert customer service team is available to provide you with professional support. Please contact us at service@greenlife.de or by phone at 0385 77 337 72 (weekdays from 8 a.m. to 4 p.m.).

The UV lamp used for UV disinfection has an expected service life of 10,000 hours and must therefore be replaced annually.    

With this set of filter cartridges, you can operate drinking water treatment systems (UV 2000 and DVGW-certified) for approximately one year. The sediment filter and activated carbon filter cartridges must be replaced every 4 months. The set consists of: 3x 20 µm sedimentation filter cartridges  3x 10 µm sedimentation filter cartridges  3x activated carbon filter cartridges

DetailsThe DN 600 dome extension is compatible with the expansion and sliding domes from 03/2021Please contact us so we can assist you with advice!

includes a leveling dome Includes walk-on plastic cover Includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 45 m² of geotextile for the installation of this shaft The 2,000-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 125 Useful volume: 2,000 l Diameter in mm: 1,220 / 1,240 Height in mm: 2,480 - 2,680  

The basic kit for efficient infiltration of rainwater and treated wastewater The GreenLife Infiltration Block Starter Set is the ideal solution for underground infiltration, drainage, and retention of rainwater and treated wastewater. It contains all the necessary components to quickly and easily install an efficient infiltration system—perfect for yard and garden drainage. Infiltration blocks promote groundwater recharge, relieve the burden on sewer systems and wastewater treatment plants, and can be expanded modularly as needed. Your benefits at a glance Complete set – includes all essential components for immediate installation. Efficient infiltration – optimal absorption and controlled release of rainwater into the ground. Modularly expandable – blocks can be combined as needed. Compact design – space-saving with high infiltration capacity. Robust & durable – made from high-quality, recycled & recyclable plastic. Lightweight & easy to install – easy to transport, quick to install. Groundwater protection – prevents surface runoff and flooding. Sustainability  The infiltration blocks are made from 100% recycled plastic, which is itself recyclable (circular economy). The infiltration elements are particularly durable and can be expanded or adapted at any time. Controlled infiltration protects water bodies, relieves the sewer system, and makes a valuable contribution to the conservation of groundwater reserves.The container material, polypropylene, is free of harmful substances*, environmentally friendly, and chemically inert (has no impact on the environment).  *To better protect human health and the environment from the risks posed by chemicals, our products comply with the EU REACH Regulation (European Chemicals Regulation on the Registration, Evaluation, Authorization, and Restriction of Chemicals).  To improve environmental quality by preventing and reducing the impact of packaging and packaging waste on the environment, our products comply with Directive 94/62/EC.  Applications Infiltration or retention of rainwater and treated wastewater Yard and site drainage New construction projects and renovations Combination with rainwater storage tanks, pre-filters, and small-scale wastewater treatment plants Relief for sewer systems and wastewater treatment plants Technical Features Volume: approx. 280 L per unit Construction: modular and expandable Material: high-quality plastic Load capacity: walkable; if installed properly, also suitable for vehicle traffic Installation: underground, wrapped in geotextile Scope of delivery: drainage blocks, mounting pins, geotextile Installation Note Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions or the instructions for the INFILTRATION TEST very carefully. Do you have questions? We’re here to help. Technical Support: 0385 / 77337-72 (8 a.m.–4 p.m.) Customer Service: 0385 / 77337-0 (7 a.m.–4 p.m.) Email: info@greenlife.de