1,230-Liter Infiltration Kit with Geotextile

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 20 m² of geotextile for the installation of this infiltration tank The 500 L infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified by a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 31.5 Useful volume: 500 l Diameter in mm: 640 Height in mm: 1,650  

includes a leveling dome Includes walk-on plastic cover Includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 30 m² of geotextile for the installation of this infiltration tank The 1,000-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 68 Useful volume: 1,000 l Diameter in mm: 1,220 / 1,240 Height in mm: 1,520 - 1,720  

Vent and Drain Valves for Safe Pressure Equalization & Reliable Emergency Drainage The vent and air release valve with DN 100 emergency overflow ensures reliable air equalization in tanks, pipelines, and infiltration systems and effectively protects the system against overpressure or underpressure. If the maximum water level is exceeded—for example, during heavy rain— the component also functions as an emergency overflow to ensure safe drainage. The vent and air release valve is typically installed at the end of an infiltration system and is usually discreetly located outdoors, e.g., in a hedge or flower bed. To ensure that (rain)water can flow smoothly into the system, a controlled air outlet must be ensured elsewhere. To achieve this, a DN 100 KG pipe is installed behind the system, which safely directs the air to the surface. The vent is the terminal point of this line and is designed to reliably prevent animals from entering. Product Features & Benefits at a Glance Pressure equalization during water withdrawal or supply —prevents damage caused by overpressure or underpressure Automatic venting and air intake – ensures trouble-free system operation Integrated emergency overflow – protects against overfilling during heavy rain Standard DN 100 connection – compatible with common KG pipe systems Lightweight & durable – approx. 350 g, made of robust polypropylene Made in Germany – manufactured to high quality standards and DIN EN ISO 14001:2015 Typical Applications Rainwater storage tanks & infiltration systems – for ventilation and emergency drainage Wastewater collection pits & infiltration systems at wastewater treatment plants – for pressure equalization and operational reliability Sustainability The product is made of durable, single-grade, and fully recyclable polypropylene. The material is long-lasting, environmentally friendly, and chemically inert—it has no impact on the environment. The production and recycling of this plastic are carried out in a resource-efficient manner. Responsible use in line with the circular economy is, for us, a central component of sustainable action. Notes The vent should be inspected once or twice a year to ensure consistently reliable operation.

Durable rainwater pre-filter with coarse debris basket – pre-assembled, low-maintenance, long-lasting The “Easy Pro” rainwater pre-filter is the reliable solution for pre-filtering rainwater before it enters your cistern or infiltration system. With two pre-assembled DN100 connections and a high-quality, walkable cover, this pre-filter offers an optimal combination of functionality, safety, and design. Thanks to the coarse debris filter basket installed in the shaft, coarse contaminants are efficiently retained. The filtered rainwater then flows cleanly for further use or infiltration into the ground. The filter is easily accessible, particularly easy to maintain, and ideally suited for installation in the ground. Product benefits at a glance:Ready to connect, pre-assembled & ready for immediate useCoarse debris filter basket for clean rainwaterDurable, slip-resistant plastic cover (load capacity up to 200 kg), child-proof screw-onuniversally applicable for cisterns or infiltration systemsTwo DN100 connections (lip seals pre-installed)Environmentally friendly: made from partially recycled PE, fully recyclableEasy to clean – ideal for areas with heavy leaf fall Application This pre-filter is ideally suited for use in infiltration systems, for example in combination with infiltration trenches, infiltration cubes, or infiltration blocks. It can also be installed upstream of a cistern to effectively remove coarse contaminants from incoming rainwater. Technical Data & NotesMaterial: durable, UV-resistant plastic (PE)Cover: walkable, slip-resistant, Ø 600 mmCleaning opening: easily accessiblePossible connection size: DN 110Symbolism: Cover design featuring the “Flower of Life” – slip-resistant & decorative Material & Quality The “Easy Pro” pre-filter is made of durable, eco-friendly polyethylene (PE)—an ideal material for use in rainwater management. PE is not only durable and shatter-resistant, but also fully recyclable, free of harmful substances, and chemically inert. This ensures that the quality of the filtered rainwater remains unaltered. Thanks to its high-quality construction, the filter is particularly easy to install and maintain. It is manufactured in a resource-efficient manner, partly using recycled plastic. Compared to pre-filters made of other materials, PE offers better recyclability, lower weight, and easier handling—both during installation and ongoing operation. Installation and Maintenance Instructions The filter should be embedded in a sand bed in a horizontal position and compacted. (An inclined position can impair function.) The shaft can be shortened and adapted to local conditions. For cleaning, we recommend regularly rinsing the filter basket with a garden hose depending on the amount of fallen leaves. Do you have any questions? Our technical support team is happy to assist you with installation, connection, or planning questions. Contact us by phone at 0385 77 337 72 (weekdays 8 a.m.–4 p.m.) or by email at service@greenlife.de.

Reliable pre-filter for rainwater infiltration – for effective rainwater filtration Reliably protect your infiltration system from dirt and coarse particles – with our high-quality rainwater pre-filter. The pre-assembled filter chamber, made of durable, eco-friendly plastic, is the ideal solution for efficient and long-lasting rainwater infiltration. Your benefits at a glance:Ready to connect & ready for immediate use (inlet & outlet DN 110)Effective coarse debris filtration for clean waterEasy maintenance and quick cleaningDurable, walkable plastic cover includedEnvironmentally friendly & fully recyclableUV-resistant and opaque Product description The rainwater pre-filter impresses with its ease of use, long service life, and quick installation. Incoming rainwater is filtered through a coarse debris filter basket. Filterable solid particles such as leaves and sand remain in the basket, while the purified water then flows into the infiltration system. The filter unit is easily accessible and can be easily inspected and cleaned—ideal even in areas with heavy leaf fall. Technical DetailsTwo pre-assembled DN 110 connections with rubber lip sealsInlet and outlet for standard KG pipeInspection opening Ø 400 mmCuttable shaft with marking groovesMaterial: Polyethylene (PE), free of harmful substances, chemically inertWalkable cover, child-proof screw-on Application This pre-filter is ideal for use in infiltration systems, e.g., in combination with infiltration trenches, infiltration cubes, or infiltration blocks. It can also be placed upstream of a cistern to treat incoming rainwater. Material, Manufacturing & QualityOur rainwater pre-filter is made of polyethylene (PE)—a material ideally suited for rainwater products because it is environmentally friendly, free of harmful substances, and chemically inert, meaning it does not react with other substances. Thus, the quality of the rainwater is not negatively affected. Maintenance & Installation Instructions As with the installation of KG pipes, the rainwater filter must also be embedded in gravel and compacted evenly all around. Please ensure—using a spirit level, for example—that the filter is installed horizontally. The shaft can be cut to any length and easily adapted to local conditions. It features circumferential marking grooves that serve as a guide when cutting with a standard jigsaw. Depending on the amount of fallen leaves, the filter insert should be removed several times a year for cleaning and, if necessary, rinsed with a garden hose. Do you have questions about this product, its installation, or setup? Our expert customer service team is available to provide you with professional support. Please contact us at service@greenlife.de or by phone at 0385 77 337 72 (weekdays from 8 a.m. to 4 p.m.).