flat tank 4000 liters

Specifications at a glance:Max. Delivery rate/flow rate: 100 l/min (6.0 m³/h)Max. Head: 45 m / Pressure: 4.5 barConnection sizes: 1" (inch) F (female thread)Power cord length: 15 mSuitable for: Rainwater harvesting, via side intake: floating extraction of clean water from below the water surfaceMax. immersion depth: 12 mHigh-performance submersible pressure pump for versatile applications Our automatic GreenLife GAP X120 submersible pressure pump is a modern, powerful, and reliable submersible pressure pump. It handles large flow rates with ease and is suitable for a wide range of applications, such as water supply and drainage tasks in clear water. The pump automatically regulates the water flow based on the user’s water demand. Examples of applications:  Extraction of rainwater from rainwater systems, tanks, and cisternsUse of clear water inside or outside a buildingIrrigation of a lawn or gardenOperation of sprinklers or sprayers (on average, three sprinklers can be operated simultaneously)Draining or pumping water, for example from poolsDomestic water supply Operation / Performance: The pump is fully submersible and is immersed in the water. The maximum immersion depth is 12 meters. The pump automatically controls water delivery when the line to the consumer is open (faucet open). When the consumer is closed, the pump switches to standby mode. The pump is then in start/stop mode and maintains pressure in the line. When the consumer is opened again, the pump restarts and delivers water.  The GAP X120 has a maximum flow rate of 100 liters per minute and a maximum head of 45 meters. This extremely high-pressure pump, with a maximum of 4.5 bar, enables effortless and effective irrigation. The power consumption (P1) is 1.15 kW. A built-in thermal motor protection prevents overload and ensures automatic restart after cooling down. Optionally, a pump base with side suction can be mounted for floating intake. This allows clean water to be drawn from below the water surface, not from the bottom. Quality: The use of stainless steel and high-quality plastic ensures a long service life. An integrated dry-run protection shuts off the pump in case of water shortage. A practical handle makes transporting the pump a breeze. With an IP 68 protection rating, the pump is dust- and waterproof. Conclusion: With the GAP X120 submersible pressure pump, you are purchasing a modern, automatic pump that switches on and off automatically according to water demand, features dry-run protection and thermal motor protection, and is suitable for both side and floating suction. Additional Features & Notes: Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), oils such as heating oil and vegetable oils, or food! The water temperature must not exceed 35°C. An integrated, easy-to-clean stainless steel suction filter provides optimal protection against debris.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only pump clean water—ideally pre-filtered with the Biovitor—to remain fully functional.  You also have the option of using the pump base if the pump is placed on a surface rather than suspended (see installation instructions). Maintenance and Installation Instructions: If there is a risk of frost, drain the pump and store it in a frost-free location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is here to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.). Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:  GAP X120 submersible pump complete with connection cable and Schuko plug (cable length 15 meters)Additional pump base with 1-inch external thread on the side90° elbow (1-inch with female thread)Stainless steel suction filter (1-inch male thread; replace the pump base to install the suction filter)Double nipple (1-inch, for screwing in the hose connection nozzle)2 hose connection fittings, each 1 inch & ¾ inch with union nut (incl. 2 gaskets)Clamp (31–34 mm)Rope (for suspending the pump and for easy removal from the cistern)Installation and operating instructions Delivery of this product via parcel service Looking for a different pump...?AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clean water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house). GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank/cistern, a pit, or a basement.

Biological Filter for Rainwater HarvestingAre you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system  How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes.Here’s how it works: The rainwater enters the gutter through the gutter grate (or other leaf guards) and eventually flows through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary. Connection options: DN 100 (dₐ = 110) Connectable area: 170 m² Scope of delivery GreenLife BIOVITOR DN 100 Biological sedimentation filter with DN 100 connection (dₐ = 110): Rainwater inlet (inlet pipe DN 100)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active media Maintenance and cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter grates or other leaf-trapping technology, is essential and must be performed regularly. Additional Notes Please refer to the operating instructions for the installation, maintenance, and mounting of the Biovitor.

The 205-liter infiltration cube is ideal for retaining, infiltrating, and draining rainwater and treated wastewater. The inlet to the infiltration cube can be configured with a DN 100 or DN 150 connection (to be determined on-site). The infiltration elements can be arranged in a row and should be wrapped in geotextile to protect against soil intrusion. The 205 L infiltration cube is an easy-to-assemble kit consisting of 6 side panels with integrated mounting pins.The "205 L Infiltration Starter Set" consists of the following components:1 205-liter infiltration cube4 m² geotextile Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. Technical Data Material: Polypropylene Weight in kg: 10 Connections: DN 100 / 150 Useful volume: 205 liters

DetailsConnection box for installing hose connections. Is inserted into a DN100 conduit, through which the water supply line also runs. A cover flush with the ground surface protects the connections. Technical Data Weight: 1.85 kgColor: grayDiameter: 288 mmTotal height: 248 mmConnections: 1/2" and 3/4"

DetailsThe garden water dispenser is a freestanding column with a faucet. It can be bolted to a solid surface or placed directly into the ground. The rainwater supply line is connected at the bottom of the rear. A spout with a removable control key is included.We recommend combining it with the GAP X80 or GAP X120 automatic rain barrel pumpTechnical SpecificationsMaterial: PolyethyleneColor: EbonyWidth: 107 mmDepth: 107 mmHeight: 1030 mm

GAP X80 Rainwater Tank Pump – Your Automatic Submersible Pump with Dry-Run Protection The GreenLife GAP X80 automatic submersible pump is a high-quality, reliable, and powerful device designed specifically for extracting clear water from rain barrels, rainwater systems, flat tanks, and cisterns. The pump can be used, among other things, for emptying rainwater storage tanks as well as for watering gardens and green spaces. The pump is fully submersible and is immersed in the water. Water delivery is automatically controlled when the line to the consumer is opened. When the consumer is closed, the pump switches to standby mode. The pump then enters start/stop mode and maintains pressure in the line. Included as an accessory is a telescopic tube with a bracket (hose kink protection) to position the pump at the edge of the tank. The convenient shut-off valve with quick-connect coupling allows you to easily draw water from the rainwater barrel. If the pump is located in a tank or cistern, a water connection box or garden tap can be operated directly via the ¾-inch connection. Product features and benefits at a glance Integrated dry-run protection & thermal fuse – protects the motor and pump from damage in case of low water level or overload Protection class IP X8 – for continuous operation underwater High flow rate – up to 83 l/min (5,000 l/h) at a maximum head of 20 meters (2.0 bar) Pumped medium: clear water – suitable for clean water, preferably filtered, max. temperature 35 °C Robust construction – fully submersible, housing made of durable plastic Fully ready for connection – includes a 10 m power cord, telescopic tube, shut-off valve, hose holder, quick-connect coupling, and mounting hardware Easy to handle – lightweight at 6.3 kg and with an integrated carrying handle Even easier for you: service & consultation included Expert advice on selection, installation, and combination with connection accessories Free shipping within Germany Guaranteed pickup service within Germany in case of repair during the 24-month statutory warranty period Applications Irrigation of gardens and green spaces – directly from rainwater storage tanks Operation of garden water taps and garden irrigation Can be integrated into automatic irrigation systems for balconies, patios, and home gardens Feed pump for flat tanks and cisterns in residential and commercial settings Notes Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), or oils such as heating oil and vegetable oils! The water temperature must not exceed 35 °C. If there is a risk of frost, drain the pump and store it in a frost-proof location. Please follow the installation and operating instructions. Do you have questions? We’re here to help. Our customer service team is here to assist you with any questions regarding pump selection, installation, or accessories. Phone: 0385 / 77337-0 (7 a.m.–4 p.m.) Technical Support: 0385 / 77337-72 (8 a.m.–4 p.m.) Email: info@greenlife.de

DetailsFor filtering rainwater. The filter basket is suspended by its stainless steel chain in the tank or cistern below the inlet (which should have an 87° elbow). It removes coarse dirt particles (> 1.5 millimeters) from the incoming rainwater and must be emptied at regular intervals.Technical DataDiameter: 300 mmHeight: 240 mmMesh size: 1.3 mmFilter basket material: Polyethylene (no additives)

DetailsExtendable dome with a plastic cover that can be driven over by cars (600 kg wheel load). The cover is secured with two screws to prevent accidental opening.Technical DataDiameter: 600 mm / 800 mmHeight: 720 mm to 820 mm

DetailsWalk-on tank cover made of high-quality plastic (max. 200 kg) for GreenLife underground tanks and sumps (except for the 1,000 L GET1.0 underground tank and the 140 L GES 0.14 sump). Integrated technical box with coupling connector for easy hose connection. Double-screwed to prevent accidental opening.

What's Included 1x 125 mm hole saw with centering drill bit 3x rubber lip seal DN 100 (Ø110)    

DetailsDN100 overflow siphonmounted on the inside of the vertical tank wallOdor trap to the storm sewerCleaning of the water surface via skimmer effectSmall animal protection—to prevent rodents from entering

DetailsSmooth inflow of rainwater into the rainwater storage tank. Fine particles of dirt slowly settle to the bottom and form a sediment layer, which has been proven to have a positive effect on the stored rainwater. Turbulence in the sediment layer is prevented, while oxygen is simultaneously supplied to the stored water. Technical DataMaterial: PolyethyleneConnection: DN 100 (Ø110)Height: 296 mmDiameter: 288 mm

DetailsThe DN 600 dome extension is compatible with the expansion and sliding domes from 03/2021Please contact us so we can assist you with advice!