DetailsSediment filter/filter cartridge, polypropylene string, 20 µm Filter set for 1 year—or as needed—consisting of 3 pieces A filter cartridge can be used for up to 4 months; after that, it must be replaced 9 7/8" (inches) x 2 1/2" (inches)

Details Sediment filter/filter cartridge, polypropylene cord, 20 µm Filter set for 1 year—or as needed—consisting of 3 pieces A filter cartridge can be used for up to 4 months, after which it must be replaced 9 7/8" (inches) x 2 1/2" (inches)

Replacement part for the in-tank filter Filter media material: Polypropylene Handle material: Stainless steel Color: blue  

Spare part for the GreenLife rainwater modules GRM 2.0, GRM 3.0, GRM 6, and GRM 7, as well as for the drinking water top-up modules GTN 6 (manual) and GTN 7 (automatic)

Compatible with GAP X120 & GUP 46 clear water pressure pumpsFor clear water pressure pumps with a 1-inch male thread1 m suction hose with 1-inch female thread connectionBrass check valveStainless steel suction filterWater intake in clean areas Sediment and suspended solids are not drawn in

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater.From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down in the water using oxygen and natural microorganisms. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary. Connection options: DN 100 (da = 110)  Connectable area: 170 m² Scope of delivery GreenLife BIOVITOR DN 100 Biological sedimentation filter with DN 100 connection (da = 110):Rainwater inlet (inlet pipe DN 100)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaNOT included in the scope of delivery are the KG branch pipe DN110 and the KG elbow DN110 45°Maintenance and cleaning Since maintenance-intensive filter designs and chemical additives are not used and there are no wear parts, maintenance intervals are generally five to ten years. Cleaning of the pre-filter systems, e.g., gutter grates or other leaf separator technology, is essential and must be performed regularly.Additional Notes  Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater HarvestingAre you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system  How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes.Here’s how it works: The rainwater enters the gutter through the gutter grate (or other leaf guards) and eventually flows through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary. Connection options: DN 100 (dₐ = 110) Connectable area: 170 m² Scope of delivery GreenLife BIOVITOR DN 100 Biological sedimentation filter with DN 100 connection (dₐ = 110): Rainwater inlet (inlet pipe DN 100)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active media Maintenance and cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter grates or other leaf-trapping technology, is essential and must be performed regularly. Additional Notes Please refer to the operating instructions for the installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years.We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.  How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 150 (dₐ= 160) Connectable area: 550 m² Scope of delivery GreenLife BIOVITOR DN 150 Biological sedimentation filter with DN 150 connection (dₐ = 160): Rainwater inlet (inlet pipe DN 150)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravel Bio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping technology, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 200 (dₐ = 200) Connectable area: 1000 m²Scope of delivery GreenLife BIOVITOR DN 200 Biological sedimentation filter with DN 200 connection (dₐ = 200):Rainwater inlet (inlet pipe DN 200)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravel Bio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor. 

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system. How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle to the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.  Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 250 (dₐ = 250) Connectable area: 1,750 m² Scope of delivery GreenLife BIOVITOR DN 250 Biological sedimentation filter with DN 250 connection (dₐ = 250):Rainwater inlet (inlet pipe DN 250)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaMaintenance and CleaningSince the system does not rely on maintenance-intensive filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes  Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor. 

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system. How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 300 (dₐ = 315)  Connectable area: 3250 m² Scope of delivery GreenLife BIOVITOR DN 300 Biological sedimentation filter with DN 300 connection (dₐ = 315):Rainwater inlet (inlet pipe DN 300)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

DetailsBasement tank made of high-quality plastic with a cover for rainwater harvesting. Seamlessly manufactured using a rotational molding process and reinforced with a 5-layer steel profile. Technical Specifications Material: PolyethyleneColor: black Weight: 255 kg Useful volume: 4,000 liters Length: 2,430 mm Width: 1,000 mm Height: 1,875 mmWithout accessories

DetailsBasement tank made of high-quality plastic with a cover, for rainwater harvesting. Seamlessly manufactured using a rotational molding process.Technical SpecificationsMaterial: PolyethyleneColor: blackWeight: 13 kgVolume: 140 LDiameter: 400 mmHeight: 1,120 mm

GreenLife's gutter guard is the perfect filter for rainwater. Whether the water is collected in cisterns or rain barrels, plant debris such as leaves and twigs can reduce water quality. It is therefore always recommended to pre-filter rainwater as thoroughly as possible, starting right at the gutter. Leaf guards filter rainwater Especially in the fall, when trees shed their leaves, it can be very frustrating when heavy rain causes leaves to enter the downspout and thus the rainwater tank. Not only does the quality of the collected water suffer from the debris, but it can also quickly clog the downspout. Cleaning often involves a lot of effort. Therefore, always use a leaf guard. Potential problems without a leaf guard Clogged downspouts Blockages in water hoses or showerheads Discoloration of the water Reduced water quality Staining of the gutter Breeding ground for pests With this simple leaf guard from GreenLife, such problems are a thing of the past. Assembly is incredibly easy, and cleaning usually requires nothing more than a hand brush. The gutter guard also provides reliable protection against birds. They can no longer nest in the gutter and must find other places to settle. Can I filter the rainwater even further? Yes, because the gutter guard is only a pre-filter. Depending on the type of your rainwater harvesting system, you can also use downspout filters, built-in filters, or tank-mounted filters. In addition to these mechanical filters, the patented Biovitoren for cisterns can also be used. These are biological filters that require very little maintenance. Installation of the gutter protection grid Installing the gutter guard is very straightforward. Each package contains segments for approximately 3.00 meters, which simply slot together. Depending on the width of the gutter, the guard can be folded. It fits any standard gutter size.https://www.youtube.com/watch?v=IVG8j1yDEMM

DetailsFor filtering rainwater. The filter is installed in the ground in front of the tank. The height difference between the inlet and outlet is 130 mm. The filter contains a slotted screen with a mesh size of 0.8 mm. During heavy rain or when the water level is very high, debris is removed from the surface of the screen. Thanks to this self-cleaning effect, maintenance requirements are lower than with basket filters. Suitable for surface drainage up to 160 m². A hook for lifting the filter is included in the scope of delivery.Technical Data Material: PolyethyleneWeight: 14.0 kgDiameter (shaft): 400 mmHeight: 1,190 mm

DetailsSmooth inflow of rainwater into the rainwater storage tank. Fine particles of dirt slowly settle to the bottom and form a sediment layer, which has been proven to have a positive effect on the stored rainwater. Turbulence in the sediment layer is prevented, while oxygen is simultaneously supplied to the stored water. Technical DataMaterial: PolyethyleneConnection: DN 100 (Ø110)Height: 296 mmDiameter: 288 mm

Plastic wrench/filter clamp, 10" (inches) for the rainwater pre-filter

Set of stickers with the message: "Not drinking water!"

DetailsThis level indicator operates without electricity; it is a pneumatic measuring device with a pump for manual operation. The underground tank can be located up to 50 m away. The tank height is continuously adjustable from 1.0 m to 2.5 m. The plastic housing is impact-resistant. Scope of deliveryIndicator20 m measuring lineMounting hardware

Details(Replacement) plastic cover for the integrated technical box.

Can be combined with the in-tank filter—an 87° KG elbow is required for installation (not included / must be provided by the customer)Odor trap to the storm sewerCleaning of the water surface via skimmer effect

DetailsDN100 overflow siphonmounted on the inside of the upper tank wallOdor trap to the storm sewerStainless steel small animal guard—to prevent rodents from entering