Geotextile 200g/m²

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 10 m² of geotextile for the installation of this infiltration chamber The 140-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 16 Useful volume: 140 l Diameter in mm: 400 Height in mm: 1,120  

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 25 m² of geotextile for the installation of this infiltration tank The 900-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified by a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 60.5 Useful volume: 900 l Diameter in mm: 780 / 1,000 Height in mm: 2,150

includes a leveling dome Includes walk-on plastic cover Includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 45 m² of geotextile for the installation of this shaft The 2,000-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 125 Useful volume: 2,000 l Diameter in mm: 1,220 / 1,240 Height in mm: 2,480 - 2,680  

GreenLife 2,000-Liter Flat Infiltration Tank – Efficient Infiltration in a Compact Space The 2,000 L Flat Infiltration Tank is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the Flat Infiltration Tank is equipped with a DN 100 rubber lip seal. The Flat Infiltration Tank is easy to maintain, inspect, and clean. Includes a surge dome with an accessible plastic cover. Your benefits at a glance Extremely flat design – minimal excavation required, quick and clean installation Large storage volume – 2,000-liter capacity for effective infiltration Pre-assembled and ready for connection – the flat tank is equipped with a DN 100 rubber lip seal Safety – walkable safety cover with “Flower of Life” embossing, slip-resistant and load-bearing up to 200 kg Technical Specifications Material: Polyethylene Weight in kg: 90 Useful volume: 2,000 l Length in mm: 2,200 Width in mm: 1,230 Height in mm: 1,260 – 1,460 Connection: DN 100 Applications Quick installation without major excavation work – ideal for small properties or retrofit projects Combination with cisterns or extensions – e.g., for rainwater retention or the addition of filters Flexibly configurable – additional options such as vehicle-accessible covers available Sustainability & Quality The flat tank is made from 100% recyclable material and designed for durability. Its simple installation, robust construction, and low maintenance requirements make it a sustainable and resource-efficient solution. Important Note Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. Do you have questions? We’re here to help. Technical Support: 0385 / 77337-72 (weekdays 8 a.m.–4 p.m.) Questions about your order: 0385 / 77337-0 (weekdays 8 a.m.–4 p.m.) Email: info@greenlife.de

280-Liter Infiltration Block – Efficient Infiltration with a Modular System The GreenLife infiltration block, with a storage capacity of 280 liters, is a space-saving solution for the infiltration, retention, and drainage of rainwater or treated wastewater directly on the property. It reduces the load on sewer systems and wastewater treatment plants and promotes groundwater recharge. Thanks to its modular design, the infiltration block can be flexibly expanded and adapted to individual requirements. Your benefits at a glance High infiltration capacity – efficient collection of rainwater and wastewater and controlled release into the ground. Compact design – only approx. 80 × 60 × 60 cm per module, ideal for limited space. Modularly expandable – multiple blocks can be easily combined. Robust & durable – made of high-quality, recycled & recyclable plastic. Lightweight & easy to install – easy to transport, quick to install. Groundwater protection – controlled infiltration promotes groundwater recharge. Even easier for you: service & consultation included Our team supports you in planning your infiltration system – from the required storage capacity to the optimal arrangement of the infiltration blocks. This ensures that your system operates efficiently and meets local requirements. Sustainability The GreenLife infiltration block is made of 100% recycled plastic (polypropylene) and is manufactured in a resource-efficient manner. Its long service life, full recyclability, and the option for modular expansion make it a sustainable solution for rainwater management.  Controlled infiltration protects water bodies, reduces the load on the sewer system, and makes a valuable contribution to the conservation of groundwater reserves. The container material, polypropylene, is free of harmful substances*, environmentally friendly, and chemically inert (has no impact on the environment). *To better protect human health and the environment from the risks of chemicals, our products comply with the EU’s REACH Regulation (European Chemicals Regulation on the Registration, Evaluation, Authorization, and Restriction of Chemicals).  To improve environmental quality by preventing and reducing the impact of packaging and packaging waste on the environment, our products comply with Directive 94/62/EC.  Applications Infiltration and retention of rainwater and treated wastewater Yard and site drainage Rainwater management in new construction and renovation projects Relief for sewer systems and wastewater treatment plants Combination with rainwater storage tanks, infiltration trenches, or wastewater treatment plants Technical features Volume: 280 L per unit Dimensions: approx. 80 × 60 × 60 cm Load capacity: walkable; if installed properly, also suitable for vehicle traffic Connection options: DN pipe systems according to standard Installation: underground, wrapped in geotextile Geotextile: to protect against soil intrusion Installation Note Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions or the instructions for the INFILTRATION TEST very carefully. Do you have questions? We’re here to help. Technical Support: 0385 / 77337-72 (8 a.m.–4 p.m.) Customer Service: 0385 / 77337-0 (7 a.m.–4 p.m.) Email: info@greenlife.de

The 205-liter infiltration cube is ideal for retaining, infiltrating, and draining rainwater and treated wastewater. The inlet to the infiltration cube can be configured with a DN 100 or DN 150 connection (to be determined on-site). The infiltration elements can be arranged in a row and should be wrapped in geotextile to protect against soil intrusion. The 205-liter infiltration cube is an easy-to-assemble kit consisting of 6 side panels, including molded-in mounting pins. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. Technical Data Material: Polypropylene Length in mm: 600 Width in mm: 600 Height in mm: 600 Weight in kg: 9.45 Connections: DN 100 / 150

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 20 m² of geotextile for the installation of this infiltration tank The 500 L infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified by a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 31.5 Useful volume: 500 l Diameter in mm: 640 Height in mm: 1,650  

includes plastic cover includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 28 m² of geotextile for the installation of this infiltration tank The 950 L infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s actual infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 58 Useful volume: 950 l Diameter in mm: 762 / 800 Height in mm: 2150  

includes a leveling dome Includes walk-on plastic cover Includes coarse debris filter basket without KG pipe and without KG fitting You will need approx. 30 m² of geotextile for the installation of this infiltration tank The 1,000-liter infiltration shaft is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the infiltration shaft is equipped with a DN 100 rubber lip seal. The incoming rainwater is filtered through a coarse debris filter basket suspended inside the shaft. The infiltration shaft is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. The 950 L, 1,000 L, and 2,000 L infiltration shafts can also be made accessible to cars and trucks with optional accessories. Technical Data Material: Polyethylene Weight in kg: 68 Useful volume: 1,000 l Diameter in mm: 1,220 / 1,240 Height in mm: 1,520 - 1,720  

Includes a compensation dome with a walkable plastic cover The 3000-liter flat infiltration tank is suitable for the retention, infiltration, and drainage of rainwater. The inlet to the flat infiltration tank is equipped with a DN 100 (Ø 110) rubber lip seal. The flat infiltration tank is easy to maintain, inspect, and clean. Local soil conditions are crucial for the correct design of an infiltration system and must be verified via a soil survey or an infiltration test. The design of the infiltration system must be adapted based on the soil’s infiltration capacity—please read the installation instructions and the instructions for the infiltration test very carefully. Feel free to contact us! The Sicker flat tanks can also be made suitable for vehicle traffic with optional accessories. Technical Data Material: Polyethylene Weight in kg: 130 Useful volume: 3000 l Length in mm: 2200 Width in mm: 1975 Height in mm: 1260 - 1460 Connection: DN 100 (Ø 110)