GreenLife volume tank

Specifications at a glance:Max. Delivery rate/flow rate: 140 l/min (8.4 m³/h)Max. Delivery head: 7 m / Pressure: 0.7 barConnection sizes: 1 ¼" (inches) F (female thread)Power cord length: 10 mSuitable for: Wastewater with particle sizes up to 19 mmMax. immersion depth: 8 m Reliable TPV 200V wastewater pump with vertical float switch This submersible pump is a simple, particularly durable, and robust pump, which is primarily used for pumping dirty water and wastewater. The TPV 200V is the version with a vertical float switch—this provides dry-run protection.  Applications:mobile drainagedomestic drainageRainwater drainagedrainage of flooded basementscirculating pond water or oxygen supply for fish pondsWater features and waterfallsWastewater drainage from shafts, pits, tanks, and cisternsSolid particles in the wastewater must not exceed 19 mm in size.  Operation / Performance: This pump conveys wastewater using vortex impellers. The motor is continuously cooled by the medium being transported, which significantly reduces the motor’s operating temperature. This pump model features an integrated thermal protection switch: The wastewater pump stops as soon as an overload occurs—the motor automatically restarts after the pump has cooled down. The TPV 200V has a maximum flow rate of 140 liters per minute, a maximum head of 7 meters, and builds up a pressure of up to 0.7 bar. The power consumption (P1) is 0.31 kW.  Quality: The TPV-200 series is made of high-quality plastic. The bearings and mechanical seal are designed for a long service life and guarantee continuous operation. Very easy cleaning and maintenance of the pump thanks to simple disassembly. The pump has a low weight of 5.3 kg. With an IP 68 protection rating, the wastewater pump is dust- and watertight. Conclusion: The reliable and durable TPV 200V transfer pump is suitable for transporting contaminated water and wastewater containing solids with a particle size of up to 19 millimeters. Additional features & notes: Larger particles—with a particle size exceeding 19 millimeters—will clog the suction strainer: Failure to observe this will reduce the pump’s service life or cause it to malfunction. The pump must not be used for seawater, flammable, corrosive, explosive, or hazardous liquids. The maximum temperature of the medium being pumped must not exceed 40°C.   Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter and stored in a frost-proof location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).  Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   TPV 200V submersible pump with vertical float switch, connection cable, and Schuko plug wiring (cable length 10 m) Operating instructionsThis product is delivered via parcel service. Looking for a different pump...? Would you like to buy a different wastewater pump? TPV 200 wastewater pump ... …a TPV pump without a float switch Would you like to buy a different wastewater pump? TPV 200A wastewater pump ... …a TPV pump equipped with dry-run protection in the form of a float switch. AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for home systems that reliably and quietly delivers clean water at up to 5.2 bar? Jet Centrifugal Pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation.  GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. GUP46 Clear Water Pressure Pump ... … a particularly durable pump for building services that operates as a submersible pressure pump underwater in the cistern or tank and is automatically controlled via a control unit (pressure switch, e.g., installed in the house). The pump operates via a side suction and is suitable for floating suction.

Compatible with GAP X120 & GUP 46 clear water pressure pumpsFor clear water pressure pumps with a 1-inch male thread1 m suction hose with 1-inch female thread connectionBrass check valveStainless steel suction filterWater intake in clean areas Sediment and suspended solids are not drawn in

Specifications at a glance:Max. Delivery rate/flow rate: 75 l/min (4.5 m³/h)Max. Head: 44 m / Pressure: 4.4 barConnection sizes: Suction line 1 ¼" (inches) IG (internal thread), discharge line 1 ¼" (inches) external threadPower cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 20 mHigh-quality and durable submersible pressure pump made of stainless steel, e.g., for building servicesThe high-quality, durable, and powerful GUP 46 submersible pressure pump delivers clear water in a stainless steel housing for home and garden irrigation. It can be installed in a clean water source, such as a well, reservoir, collection tank, or rainwater tank/cistern. As a multistage submersible pressure pump, it is primarily used in building services. A float switch acts as dry-run protection. Operation / Performance: The pump is installed in the water and draws water through a 1 ¼-inch connection located on the lower side of the pump. A floating suction filter is typically connected to this. Automatic operation of the pump is achieved via an automatic switch located in the discharge line (e.g., installed inside the house). The pump is characterized by its quiet operation and is virtually silent underwater. The GUP 46 has a maximum flow rate of 75 liters per minute, a maximum head of 44 meters, and builds up a pressure of up to 4.4 bar. The power consumption (P1) is 0.85 kW.  Quality: This pump delivers water using four stainless steel impellers on a stainless steel shaft within a stainless steel housing—all water-contacting components are made of stainless materials. Protection class IP 68 ensures the pump is protected against dust and continuous submersion in water. A float switch acts as dry-run protection. Conclusion: The GUP 46 stainless steel submersible pressure pump is durable and perfectly suited for permanent installation, for example in a rainwater tank used to supply your home. All components that come into contact with water are made of non-corrosive materials (stainless steel). Additional features & notes: Do not pump saltwater, wastewater, corrosive, highly flammable, or explosive substances (e.g., gasoline, kerosene, nitro thinner), or oils such as heating oil and vegetable oils! The water temperature must not exceed 40°C. In case of overload, the pump is shut off by the built-in thermal protection switch. After cooling down, the motor restarts automatically. The pump weighs 16.7 kg. The EAN number is 4400008111436.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter if there is a risk of frost and stored in a frost-proof location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).  Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   GUP 46 submersible pressure pump with side suction port 1 ¼ inch, with float switch for dry-run protection, with connection cable and Schuko plug (cable length 15 m) Installation and operating instructionsDelivery of this product via parcel serviceLooking for a different pump...?AMIGA MH1100 4M pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces.GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank, cistern, pit, or basement.

Specifications (Compact)Max. delivery rate/flow rate: 50 l/min Max. head: 38 m / Pressure: 3.8 barConnection sizes: 1" (inch) male (external thread)Power cord length: 1.2 m Suitable for: Rainwater harvesting, clean water use Max. suction depth: 8 meters Self-priming, reliable pump, ideal for garden irrigation The Jet centrifugal pump can be used to pump clear water, for example for watering a garden or green space. It is self-priming and pumps clear water or rainwater from a tank (cistern). A control unit in the form of an automatic switch can be mounted on the pump, ensuring automatic on/off operation and dry-run protection when the cistern is empty. This allows the Jet pump to also be used as an affordable domestic water supply system—due to its single impeller, it has a higher sound pressure level than, for example, the AMIGA MH800.  As a garden pump, it is perfectly suited for rainwater harvesting systems. Operation / Performance: The Jet centrifugal pump has a maximum flow rate of 50 liters per minute, a maximum head of 38 meters, and a pressure of 3.8 bar. The power consumption is 0.81 kW / 3.7 A. The jet centrifugal pump features an on/off switch and a carrying handle. The maximum suction line length is 15 meters; the maximum suction head between the cistern floor and the pump’s suction connection should not exceed 8 meters. If the suction line exceeds these values, it is recommended to use a submersible pressure pump (e.g., GAP X120, GUP46). All specified values are maximum values, which may be lower when used in combination. Quality: The solid construction of this pump, made from materials such as stainless steel and durably coated cast iron, ensures durability and reliable performance. Strict controls and careful testing guarantee excellent quality. With protection class IP 44, the pump is protected against dust and splashing water. Conclusion: The Jet centrifugal pump is the ideal choice for anyone looking for an efficient, self-priming, and affordable pump to ensure their (rain)water supply in the garden. Additional Features & Notes: The Jet centrifugal pump can be secured to a solid surface such as wood or concrete using its sturdy base. The pump should be operated in a dry location. The pump weighs 7.2 kilograms.  Maintenance and installation instructions: Please follow the installation and operating instructions. If there is a risk of frost, drain the pump and store it in a frost-proof location. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).   Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:  Jet centrifugal pump complete with connection cable and Schuko plug wiring (cable length 1.2 meters)HandleAccessories for the suction side: Brass fitting (hose nozzle to 1" union nut), clamp for 29–31 mmAccessories for the discharge side: Quick-connect coupling to 1" female thread, quick-connect coupling to 3/4" hose nozzle, quick-connect coupling to 1/2" hose nozzle Operating instructions    Delivery of this product via parcel service Looking for a different pump...? AMIGA MH800 4M Pump … a dry-mounted pressure pump for domestic applications that reliably and quietly delivers clean water at a maximum pressure of 3.5 bar. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house).  GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. GAP X 120 Automatic Submersible Pressure Pump … a modern pump that operates as a submersible pressure pump underwater in a cistern or tank and features dry-run protection via a switch control unit integrated directly into the pump.  TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank, cistern, pit, or basement.

Brief specifications Max. delivery rate/flow rate: 90 l/min Max. head: 52 m (5.2 bar) Connection: 1" female thread (FT) Power cord length: 1.2 m Suitable for: Rainwater harvesting, clean water use Max. suction depth: 8 meters Reliable pump for rainwater and clear water use The Amiga MH1100 4M is a powerful and exceptionally quiet pressure pump designed to reliably supply rainwater and clear water for home and garden use. It is ideal for use in building services, such as rainwater harvesting systems or for domestic water supply. When combined with an automatic switch (accessories: automatic switch 54, 87, or 65), the pump is ideal as a domestic waterworks system for automated water supply, for example, for medium-sized residential units. It is also optimally suited for rainwater harvesting systems as well as for pressure boosting and household water supply. Thanks to self-priming technology, water can be reliably pumped even from lower-lying sources such as cisterns or tanks. This makes the pump ideal for a convenient and efficient water supply in everyday life. Quality & Performance This pump (including impellers and shaft) is made of stainless steel and coated cast iron and is designed for long-lasting and reliable use. Quality is ensured through regular inspections and careful testing. Thanks to its four integrated impellers (=stages), this centrifugal pump operates very quietly and smoothly. It has a maximum flow rate of 90 liters per minute, a maximum head of 52 meters, and builds up a pressure of up to 5.2 bar. The power consumption is 0.75 kW. Maintenance and Installation Instructions The pump should be installed in a dry location. For wall mounting, we recommend the wall bracket for the Amiga MH800/Amiga MH 1100 4M pumps. If there is a risk of frost, drain the pump and store it in a frost-proof location. Please follow the installation and operating instructions. Our Service Promise In the event of a repair, we guarantee a pickup service within Germany during the 24-month statutory warranty period. Looking for a different pump...?AMIGA MH800 4M Pump ...a pump of the same quality with slightly lower performance at a lower priceJet Centrifugal Pump …a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house).  GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. GAP X 120 Automatic Submersible Pressure Pump … a modern pump that operates as a submersible pressure pump underwater in a cistern or tank and features dry-run protection via an automatic switch integrated directly into the pump.  TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank, cistern, pit, or basement.

Specifications at a glance:Max. Delivery rate/flow rate: 100 l/min (6 m³/h)Max. Delivery head: 30 m / Pressure: 3.0 barConnection sizes: 1" (inch) F (female thread)Power cord length: 15 mSuitable for: Rainwater harvesting, clear water useMax. immersion depth: 12 mDAB Divertron X 650 electronic multistage submersible pressure pump The DAB Divertron X 650 pump is designed for pumping clean water, e.g., rainwater, for gardening and irrigation. As a multistage submersible pump with integrated electronics for automatic on/off switching, it can be installed in collection tanks, wells, tanks, or cisterns with a maximum submersion depth of 12 meters.  Examples of applications:  Extraction of rainwater from rainwater systems, tanks, and cisternsUse of clear water inside or outside a buildingIrrigation of a green area or gardenOperation of sprinklers or sprayers (on average, three sprinklers can be operated simultaneously)Draining or pumping water, for example from poolsDomestic water supply How it works / Performance: Depending on the water volume, the integrated control system switches the pump on and off fully automatically: For example, when you turn on a faucet, the pump starts automatically and switches off again after the faucet is turned off. An integrated dry-run protection ensures that the pump is not damaged—it switches itself off automatically when there is a lack of water. An automatic reset returns the pump to operating mode after a malfunction. The pump features an integrated check valve, an integrated start-up capacitor, and thermal protection against motor overheating. A pressure switch and flow sensor are also integrated. The DAB Divertron X 650 has a maximum flow rate of 100 liters per minute, a maximum head of 30 meters, and builds up a pressure of up to 3.0 bar. The power consumption (P1) is 0.63 kW.  Quality: The DAB Divertron X 650 pump body and impellers are made of technopolymer (a high-quality, durable plastic) to resist corrosion and oxidation. The motor shaft is made of stainless steel (AISI 416 + AISI 304). The pump is characterized by high operational safety, easy installation, and high reliability. It is suitable for continuous operation and is quiet since it is installed underwater. With an IP 68 protection rating, the pump is dust- and watertight. Conclusion: The DAB Divertron X 650 is a high-quality electronic, multistage submersible pressure pump with an integrated control unit. It is ideal for use with rainwater/clear water in the home and garden. Additional Features & Notes: The pumped medium must be clean, free of solid or abrasive substances, non-viscous, non-corrosive, non-crystalline, and chemically neutral. Quick access to the capacitor is possible without disassembling the pump. We recommend a small expansion tank (installed in the pressure line) as an option in case of leaks or low water consumption. The pump can be installed in a fixed or movable vertical position. The pump weighs 9.5 kilograms.Please note that (as described in the installation and operating instructions) this is a clear water pump that must only be used to transport clean water—ideally pre-filtered with the Biovitor—to ensure long-term functionality. Maintenance and Installation Instructions: If there is a risk of frost, drain the pump and store it in a frost-free location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? You can get expert assistance from our customer service: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.). Our service promise:In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:  Clear water pressure pump complete with connection cable and Schuko plug wiring (cable length 15 meters) with 1" (inch) side suction port for floating intake, built-in check valve90° elbow (1 inch with female thread)Stainless steel suction filter (1-inch external thread)1 hose connection fitting, 1 inch1 clamp for 31–34 mm1 10 mm anchor, 1 hookRope for suspending the pump for easy removal from the cisternQuick start guide (detailed operating instructions here), safety instructionsThis product is delivered via parcel service Looking for a different pump...?AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for domestic use that reliably and quietly delivers clear water at a maximum pressure of 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GUP 46 Clear Water Pressure Pump … a particularly durable pump that operates as a submersible pressure pump underwater in a cistern or tank and is automatically controlled in the house via an automatic switch (pressure switch, e.g., installed in the house). GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. TPV 200 wastewater pump ... a particularly durable, heavy-duty pump capable of pumping wastewater from a tank/cistern, a pit, or a basement.

Brief Specifications Max. delivery rate/flow rate: 60 l/min Max. head: 35 m (3.5 bar) Connection: 1" female thread (FT) Power cord length: 1.2 m Suitable for: Rainwater harvesting, clear water use Max. suction depth: 8 meters Reliable pressure pump for domestic water supply with rainwater and clear water The Amiga MH800 4M is a powerful and exceptionally quiet pressure pump for the reliable supply of rainwater and clear water in the home and garden. It is ideally suited for rainwater harvesting systems and domestic water supply. When combined with an automatic switch (accessories: automatic switch 54, 87, or 65), the pump is ideal as a domestic waterworks system for automated water supply, for example, for small to medium-sized residential units. It is also optimally suited for rainwater harvesting systems as well as for boosting water pressure in the home. Thanks to its self-priming technology, water can be reliably pumped even from lower-lying sources such as cisterns or tanks. This makes the pump ideal for a convenient and efficient water supply in everyday life. Quality & Performance This pump (including impellers and shaft) is made of stainless steel and coated cast iron and is designed for long-lasting and reliable use. Quality is ensured through regular inspections and careful testing. Thanks to its four integrated impellers, this centrifugal pump operates very quietly and smoothly. It has a maximum flow rate of 60 liters per minute, a maximum head of 35 meters, and builds up a pressure of up to 3.5 bar. The pump is suitable for reliable use indoors and in sheltered outdoor areas. Maintenance and Installation Instructions The pump should be installed in a dry location. For wall mounting, we recommend the wall bracket for the Amiga MH800/Amiga MH1100 4M pumps. If there is a risk of frost, drain the pump and store it in a frost-free location. Please follow the installation and operating instructions. Our Service Promise In the event of a repair, we guarantee a pickup service within Germany during the 24-month statutory warranty period. Looking for a suitable alternative? AMIGA MH1100 4M Pump – same design, but higher performance for larger households and greater delivery pressure Jet centrifugal pump – versatile garden pump with handle GUP 46 Clear Water Pressure Pump – submersible pressure pump for cisterns or tanks with an external automatic switch. GAP X 80 Automatic Submersible Pressure Pump – for rain barrels, flat tanks, and cisterns. GAP X 120 automatic submersible pressure pump – with integrated automatic switch and dry-run protection. TPV 200 wastewater pump – robust pump for pumping out wastewater.

Specifications at a glance:Max. Delivery rate/flow rate: 140 l/min (8.4 m³/h)Max. Delivery head: 7 m / Pressure: 0.7 barConnection sizes: 1 ¼" (inches) F (female thread)Power cord length: 10 mSuitable for: Wastewater with particle sizes up to 19 mmMax. immersion depth: 8 mReliable TPV 200A wastewater pump with float switch This submersible pump is a simple, particularly durable, and robust pump, which is primarily used for pumping contaminated water and wastewater. The TPV 200A is the version with a float switch—this provides dry-run protection. Applications:mobile drainagedomestic drainagerainwater drainagedrainage of flooded basementscirculating pond water or oxygenation for fish pondsWater features and waterfallsWastewater drainage from shafts, pits, tanks, and cisternsSolid particles in the wastewater should not exceed 19 millimeters in size.  Functionality / Performance: This pump conveys wastewater using vortex impellers. The motor is continuously cooled by the medium being transported, which significantly reduces the motor’s operating temperature. This pump model features an integrated thermal protection switch: The wastewater pump stops as soon as an overload occurs—the motor restarts automatically after the pump has cooled down. The TPV 200A has a maximum flow rate of 140 liters per minute, a maximum head of 7 meters, and builds up a pressure of up to 0.7 bar. The power consumption (P1) is 0.31 kW.  Quality: The TPV-200 series is made of high-quality plastic. The bearings and mechanical seal are designed for a long service life and guarantee continuous operation. The pump is very easy to clean and maintain thanks to its simple disassembly. The pump has a low weight of 5.1 kg. With protection class IP 68, the wastewater pump is dust- and watertight. Conclusion: The reliable and durable TPV 200A transfer pump is suitable for transporting contaminated water and wastewater containing solids with a particle size of up to 19 millimeters. Additional features & notes: Larger particles—with a particle size exceeding 19 millimeters—will cause the suction strainer to clog: Failure to observe this will reduce the pump’s service life or cause it to malfunction. The pump must not be used for seawater, flammable, corrosive, explosive, or hazardous liquids. The maximum temperature of the medium to be pumped must not exceed 40°C. Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter and stored in a frost-proof location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.). Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   TPV 200A submersible pump with float switch, connection cable, and Schuko plug wiring (cable length 10 meters) Operating instructionsThis product is delivered via parcel service. Looking for a different pump...? Would you like to buy a different wastewater pump? Wastewater pump TPV 200 ... …a TPV pump without a float switchWould you like to buy a different wastewater pump? TPV 200V wastewater pump ... …a TPV pump equipped with dry-run protection in the form of a vertical float switch.AMIGA MH1100 4M Pump ... a dry-mounted pressure pump for home systems that reliably and quietly delivers clean water at up to 5.2 bar? Jet Centrifugal Pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation.  GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces. GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. GUP46 Clear Water Pressure Pump ... … a particularly durable pump for building services that operates as a submersible pressure pump underwater in the cistern or tank and is automatically controlled via a switch (pressure switch, e.g., installed in the house). The pump operates via a side suction and is suitable for floating suction.

Specifications (summary):Max. Delivery rate/flow rate: 140 l/min (8.4 m³/h)Max. Delivery head: 7 m / Pressure: 0.7 barConnection sizes: 1 ¼" (inches) F (female thread)Power cord length: 10 mSuitable for: Wastewater with particle sizes up to 19 mmMax. immersion depth: 8 mReliable TPV 200 wastewater pump This submersible pump is a simple, particularly durable, and robust pump, which is primarily used for pumping contaminated water and wastewater. The TPV 200 is the version without a float switch—it does not have dry-run protection.  Applications:mobile drainagedomestic drainagerainwater drainagedrainage of flooded basementscirculating pond water or oxygenation for fish pondsWater features and waterfallsWastewater drainage from shafts, pits, tanks, and cisternsSolid particles in the wastewater should not be larger than 19 millimeters.  Functionality / Performance: This pump conveys wastewater using vortex impellers. The motor is continuously cooled by the medium being transported, which significantly reduces the motor’s operating temperature. This pump model features an integrated thermal protection switch: The wastewater pump stops as soon as an overload occurs—the motor restarts automatically after the pump has cooled down. The TPV 200 has a maximum flow rate of 140 liters per minute, a maximum head of 7 meters, and builds up a pressure of up to 0.7 bar. The power consumption (P1) is 0.31 kW.  Quality: The TPV-200 series is made of high-quality plastic. The bearings and mechanical seal are designed for a long service life and guarantee continuous operation. The pump is very easy to clean and maintain thanks to its simple disassembly. The pump has a low weight of 4.9 kg. With an IP 68 protection rating, the wastewater pump is dust- and watertight. Conclusion: The reliable and durable TPV 200 transfer pump is suitable for transporting contaminated water and wastewater containing solids with a particle size of up to 19 millimeters. Additional features & notes: Larger particles—with a particle size exceeding 19 millimeters—will clog the suction strainer: Failure to observe this will reduce the pump’s service life or cause it to malfunction. The pump must not be used for seawater, flammable, corrosive, explosive, or hazardous liquids. The maximum temperature of the medium being pumped must not exceed 40 °C. Ensure that the pump does not run dry.Maintenance and Installation Instructions: The pump is maintenance-free and must be installed in a frost-proof location. When used in above-ground tanks, it must be drained in winter and stored in a frost-free location. Please follow the installation and operating instructions. Do you have questions about this pump or other rainwater harvesting products? Our customer service team is available to provide expert assistance: 0385 77 337 72 (weekdays 8 a.m.–4 p.m.).  Our service promise: In the event of a repair, we will send you a free return label for shipping via DHL to our factory—during the 24-month statutory warranty period. Scope of delivery:   TPV 200 submersible pump with connection cable and Schuko plug (cable length 10 m) Operating instructionsThis product is delivered via parcel service. Looking for a different pump...? Would you like to buy a different wastewater pump? Wastewater pump TPV 200A, Wastewater pump TPV 200V ... a TPV pump that also features dry-run protection in the form of a float switchAMIGA MH1100 4M pump ... a dry-mounted pressure pump for home systems that reliably and quietly delivers clean water at up to 5.2 bar?Jet centrifugal pump … a pump with a handle that, as a single-stage centrifugal pump, can be used in a variety of ways for garden irrigation. GAP X 80 Automatic Submersible Pressure Pump … an automatic submersible pressure pump designed for the reliable extraction of clear water from rain barrels, rainwater systems, flat tanks, and cisterns for the irrigation of gardens and green spaces.GAP X 120 Automatic Submersible Pressure Pump … a modern submersible pressure pump that operates underwater in a cistern or tank and features dry-run protection via an automatic switch integrated into the pump. GUP46 Clear Water Pressure Pump ... … a particularly durable pump for building services that operates as a submersible pressure pump underwater in the cistern or tank and is automatically controlled via a control unit (pressure switch, e.g., installed in the house). The pump operates via a side suction and is suitable for floating suction.

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local waterways. This ensures consistently high-quality rainwater in your rainwater harvesting system. How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle to the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.  Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 250 (dₐ = 250) Connectable area: 1,750 m² Scope of delivery GreenLife BIOVITOR DN 250 Biological sedimentation filter with DN 250 connection (dₐ = 250):Rainwater inlet (inlet pipe DN 250)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaMaintenance and CleaningSince the system does not rely on maintenance-intensive filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of the pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes  Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor. 

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can count on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system. How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to avoid creating turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters. Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is highly suitable for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 300 (dₐ = 315)  Connectable area: 3250 m² Scope of delivery GreenLife BIOVITOR DN 300 Biological sedimentation filter with DN 300 connection (dₐ = 315):Rainwater inlet (inlet pipe DN 300)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravelBio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor.

Biological Filter for Rainwater Harvesting Are you looking for a low-maintenance rainwater filter that purifies your water without chemicals and achieves a high yield of top-quality rainwater? Then you’re in good hands with the GreenLife Biovitor. The Biovitor contains no wear parts, so you can rely on maintenance intervals of up to ten years. We developed the GreenLife Biovitor to eliminate the need for chemical additives and high-maintenance filters in rainwater purification. Unlike conventional designs, the Biovitor uses the same natural processes for biological self-purification as our local water bodies. This ensures consistently high-quality rainwater in your rainwater harvesting system.How our patented BIOVITOR biological rainwater filter works The Biovitor purifies your rainwater 100% chemical-free based on the natural decomposition process of organic material, such as leaf debris. It consists of two optimally sized chambers that guarantee highly efficient biological processes. Here’s how it works: Rainwater flows through the gutter grate (or other leaf guards) into the gutter and finally through the downspout into the Biovitor, which is located in the tank or cistern. The first chamber contains marble gravel, which can slightly raise the pH of the water to neutralize slightly acidic rain, if necessary. This also slightly mineralizes the rainwater. From here, the pre-treated water flows into the second chamber, which is equipped with bio-active media. Here, the remaining organic components are decomposed and broken down by oxygen and natural microorganisms in the water. Inorganic components settle at the bottom. The clear and clean water then slowly enters the rainwater tank to prevent turbulence. The Biovitor acts as an inlet stabilizer and achieves 100% rainwater yield, as there are no losses due to contaminated rainwater filters.Applications for the BIOVITOR Rainwater Filter  Our biological rainwater filter improves the quality of your rainwater through biological processes. It is suitable for all cisterns and can be retrofitted to almost all rainwater systems. Additionally, the Biovitor is very well suited for a rainwater system with subsequent infiltration; an additional filter before infiltration is then not necessary.  Connection options: DN 200 (dₐ = 200) Connectable area: 1000 m²Scope of delivery GreenLife BIOVITOR DN 200 Biological sedimentation filter with DN 200 connection (dₐ = 200):Rainwater inlet (inlet pipe DN 200)Biovitor tank with 1st and 2nd Biovitor chambers and overflows into the tankMarble gravel Bio-active mediaMaintenance and Cleaning Since the system does not rely on high-maintenance filter designs or chemical additives and contains no wear parts, maintenance intervals are typically five to ten years. Cleaning of pre-filter systems, e.g., gutter screens or other leaf-trapping devices, is essential and must be performed regularly.Additional notes Please refer to the operating instructions for installation, maintenance, and mounting of the Biovitor. 

DetailsVehicle-accessible cover (max. wheel load 600 kg) for all underground tanks and shafts with a sliding dome. Double-bolted to prevent accidental opening of the cover. Technical Data Material: Polyethylene Weight in kg: 6.5 kg Diameter in mm: 650

DetailsExtendable dome with a plastic cover that can be driven over by cars (600 kg wheel load). The cover is secured with two screws to prevent accidental opening.Technical DataDiameter: 600 mm / 800 mmHeight: 720 mm to 820 mm

DetailsExtendable dome for mounting on the tank dome. The expansion dome has a variable length ranging from 620 mm to 820 mm and features a walkable tank cover (max. load capacity 200 kg). The cover is secured with two screws to prevent accidental opening.Technical DataWeight: 18.2 kgDiameter: 600 mm / 800 mmHeight: 620 mm – 820 mmWith walkable tank coverNew model available starting 03/2021

Manhole element with a dome extension for installing a heavy-duty cover.The scope of delivery includes a sealing strip (EPDM) that is positioned between the tank and the dome. Cover and frame must be provided by the customer!Height in cm: 1080Diameter in cm: 612 / 808   

DetailsThe DN 600 dome extension is compatible with the expansion and sliding domes from 03/2021Please contact us so we can assist you with advice!